What is the difference between an inline and offline chlorinator?
Reply
An inline chlorinator would be plumbed directly inline with the plumbing. For an existing pool, this would mean a section of pipe would need to be cut out to install the chlorinator. An offline chlorinator attaches to existing plumbing by chlorinator tubing (holes would be drilled into existing pipe to attach the tubing.)
Reply
I have a rectangular 32'x16', 4'both ends 5' center pool approx. gals. 17,280. vinyl
liner in ground pool.
Can you please suggest the proper Pool Chlorinator i should use?
Than you
Reply
Will this work for a 24,000 gallon pool? Or which one do I need to be looking at for online feeder
Reply
Hi. Yes, this PureLine Pool In Line 9 lbs Chlorinator will sanitize a 24,000 gallon pool.
Reply
Is there a better affordable option? What kind of warranty? And is it in stock?
Reply
This is a great option and the most affordable we offer. The warranty is 1 Year and its in stock ready to ship.
Reply
Will this impede the water flow to the pool from the pump ?
Reply
Hi Bruce, The inline chlorinators do bottleneck the plumbing somewhat causing higher PSI and can restrict flow a bit. If this is a concern then we would suggest the PL0002 Off-Line Pool Chlorinator which does not have these issues.
Reply
What's a good default setting for a 24' round above-ground pool?
Reply
Hi Dave, so the average swimming pool needs 1 chlorine tablet per 5k gallons of pool water. With that said you can use 3 tablets per week during the swim season and have the chlorinator turned all the way up. During cooler seasons the chlorine will need to be monitored and the amount added to it adjusted accordingly.
Reply
I have a 17000 gal. in ground pool.Will this chlorinator do the job.What fittings do I need and do they come with this chlorinator.
My plumbing is 1 1/2 inch.
Reply
Yes this will work on a 17,000 gallon pool, you will just need some standard plumbing fittings from your local hardware store to install.
Reply
Do you carry the necessary fittings to install
Reply
Hi Stephen, Could you send a few photos of the location where you will be installing? Also is your plumbing 1.5" or 2"? Simply click the reply link below to upload your photos.
Reply
I have a PL 0001 in line pool chlorinator. The connectors broke - both ends - I need replacement parts
Reply
Hello Edward. Attached please find the Ocean Blue Models 165010 & 165012 exploded parts diagram. Replacement parts are identified for the in-line and off-line models.
Reply
