Hello. I need to replace 3 lights in my pool. I have halogen ones now and I would like to go to LED. My existing lights work off of a light switch. Could I sync the three lights if I use the switch instead of remotes?
Reply
Hi Lisa, Yes you can synch 3 lights together and I would suggest using a light switch instead of the remotes as we have better success with synching multiple light when you using the light switch over the remote. I would suggest this PureColors LED Light 12V 30' Cord Light Switch Model
Reply
What are the dimensions/size of this light? I haven't pulled my light out yet and wanted to know if this light will button up to the Stainless Steel ring I have mounted to my pool wall. It is 10 1/2 inches wide.
Reply
Hi Bill, The face of this light measures 10-3/4" this is the measurement including the face ring. The depth from the front of the glass lens to the back of the light where the cord comes out is 8". The narrow part of the light where the cord comes out of the light measures 2-3/4"
Reply
Would I have to lower the water level below the light to replace my existing pool light?
Reply
No you would not need to lower your water level, here is our Video on How to Replace a Pool Light which will show you the process.
Reply
would i have to supply a 12v power supply fdor unit? i now have a 110v light fixture and would like to replace it
Reply
Yes you would require this 100 Watt Transformer if you didn't want to install a transformer then you could go with one of the 120V PureColors Light Fixtures here.
Reply
Where is the 2nd part of the remote ? Part of the fixture underwater?Or in line with the transformer. Thanks Dan
Reply
Hi, Dan. The Remote Receiver is located inside of the bulb. The Intermatic Transformer is sold separately.
Reply
How many volts should I set the intermattic transformer to for this bulb 12 or 13?
Reply
