Will the GRC40GH be recognized by my Hayward Aquarite control? Will the unions match up the same way?
Reply
The GRC40GH is manufactured by CompuPool and will match the thread pattern of the pre-existing unions (the cell does not come with unions). To date we have sold quite a few of these units and have had no reports of any incompatibility issues.
Reply
have the aquarite t 15 cell 40 thousand gallon cell is there a less expensive one on market just as good or better the one i have now only has a one year warrenty and cost over 540 dollars
Reply
Hi Donald, This PL7106 AquaRite Replacement Cell would be the cell for you as it is $399 and comes with a 2-year warranty. This cell is just as good as the Hayward original as the titanium cell blades are made from the same material supplier as the Hayward original.
Reply
Where do I find T-15 on my cell? I am trying to find replacement for my Heyward "Aqua Collection" serial # 3E1011-2079537, I have a photo
Reply
Hi, Junior. The Aqua Collection Series only use the T-15 Cell based on the info I've found. If your cell has the gallon capacity size, you can also use that to determine what cell size you have.
Reply
The only numbers I see on my T-15 cell (aqua Lite) are: *1E0801-4014185*. Is the PL7106 a compatible replacement? Will I have to change the cell setting on my motherboard which is currently set at T15? please email me & you can also post on your Q&A site.
Reply
Hi Jeff, this would be the replacement cell that you need and you would not need to change the cell setting on your power supply.
Reply
Many suppliers of replacement cells specify that the Aqua Rite controller needs to be running software version 1.50 or higher. Does the PL7106 have any such requirement? Also, is the 2-year warranty prorated or non-prorated?
Reply
Hello- The Aqua Rite Salt Cell Replacement T-15 (2 Year Warranty) - PL7106 does require controller firmware version 1.5 or higher. The warranty on the PL7106 is a two-year full warranty.
Reply
how do you know what firmware you have
Reply
Hi Chuck, By repeatedly pressing the small diagnostic button on your AquaRite one of those readings will be your software revision, I believe it should be the 7th press. The software will be displayed in a format like this on your display Software revision level (r1.xx) the .xx needs to be .50 or higher
Reply
will this work with a pentair Intellichlor power supply? (Overall pentair set-up) How does it compair to the Pentair salt cell?
Reply
I'm sorry this does not work with a Pentair Intellichlor. You would need one of the these Pentair Intellichlor Replacement Salt Cells
Reply
My hayward T-15 cell is 12 1/4 long. ( cell only ) Your cell is 13 1/4 long. I think that this is the measurment form the cuplings. can you check on this ? Before I purchase this cell?
Reply
Hi Bill, Yes the 13-1/4" measurement is from coupling to coupling. The cell itself is 12-1/4" long
Reply
I have a 6 year old Hayward Pro Logic System PL-PS-4 with a Hayward Turbo Cell T-Cell-15 salt generator that I think is wearing out. Is this generic salt cell replacement compatible with my Pro Logic system? It is not listed on the list of compatible systems. And are specs on this unit exactly the same as the Hayward OEM in all respects? Thanks
Reply
Hello- The Aqua Rite Salt Cell Replacement T-15 (2 Year Warranty) - PL7106 does not work with the Pro logic systems. It is only compatible with the Hayward AquaRite (T-CELL-15 & T-CELL-9 Models)Goldline Aquarite (T-CELL-15 & T-CELL-9 Models)BioGuard Mineral SpringsSwimPure PlusReplaces the Hayward GLX-CELL-15 Salt CellCompatible with Aquarite Software Rev. 1.5 and higher. Press the diagnostic button 7 times to see your Software VersionRev. 1.5 was released late 2008.
Reply
Hi...do I assume correctly that this replacement cell unit does not come with the couplings? I already have the couplings on my plumbing...thanks.
Reply
These come with the couplings and not the tailpiece which is already glued to your existing plumbing.
Reply
will this cell replace my older model cell #5E06062109322
Reply
Hi, Steve. This Pureline Aqua Rite Replacement Cell can be used to replace your cell. Your controller must have a software revision of 1.5 or higher.
Reply
I have a T-CELL-15 with a Goldline Aqua Rite controller. I believe this was installed in 2006. Do I still need to worry about the revision level on the controller or will this unit work with what I have?
Current cell is 5E0505-2192325
Reply
Hi, Ed. You will have to make sure that your controller has a software rev. of 1.5 and higher. Press the diagnostic button 7 times to see your Software Version.
Reply
I need to replace my salt cell T-15. My software version is 1.4. Is it possible to up date the software version?
Reply
Hi, Berry. You can update the software by replacing the Main PCB - GLXPCBRITE.
Reply
Hi, can you respond to this Hayward marketing language:
"Beware of Imitations
With other replacement cells, you get what you pay for: lower quality and shorter operating life. Through independent tests by the leading authority in electrolytic cells, some generic cells have been shown to have 75% less operating life than a Genuine Hayward T-CELL-15."
Also, if you state that the typical cell lasts 3-5 years, why only offer a 2 year warranty?
Reply
Hi Ben we do agree with Hayward that there are some After Market salt cell which are of very low quality. The reason being is that many manufacturers use a low quality material for the cell blades inside of the salt cell. The cell blades are what make your chlorine, when the cell blades go bad is when the salt cell needs to be replaced. The blades are titanium and then coated with a material called ruthenium. The cell blades used in the PureLine after market cell are made in the U.S.A and are made to the same quality as the Hayward blades. Other after market cells have the blades made in China and the quality is lower. The cell will last for 7,000 hours so if someone rruns the cell 24-7 365 days per year then this would be 10,000 hours per year. An average pool owner would run the system 4 hours per day at 365 days or 1,500 hours per year. This is why we have set the warranty at 2 yrs which we feel is strong compared to other salt cells.
Reply
How often do the cells are a saltwater pool have to be replaced
Reply
Hi. Most cells are to be replaced 3-5 years if your pool runs year round and longer if seasonal.
Reply
Confirm that 1 initial cost to go to salt $1259 for 40,000 gallon pool plus some misc parts plus 2 pool start up each year you add 25 bags of #40 salt to the water or $150 additional @$6/bag/year 3 the inline salt T device replacement every 3-5 years for $579 4 year 1 = $1259 + $150 +$100 misc or $1500 ish so if I move to salt factoring the initial cost averages 500 per year for first 3 years then the replacement inline T cost $579 seems a lot
Reply
Hi, Eric. They are other advantages of switching to a salt pool, it is gentler on the eyes and skin, reduce storing and handling of unsafe chemicals, over chlorinating your pool, and softer-feeling water.
Reply
I'm not sure if I need a new cell or a new main board. A couple days ago, my Aqua Rite SWG stopped generating chlorine, and only the "Power" light is on (all other lights are off). My display readings are as follows:
Salt level: 2600
30.9 volts
0.00 amps
Instant salinity: -0
AL-5
r1.33
If I need a new cell, do you sell an aftermarket one for Aqua Rite Software Rev. 1.33?
Thanks for your help!
Good afternoon, yes based on your readings you would need to order the PureLine Pureline Replacement T-15 Cell for AquaRite. This unit would work with any Hayward system that needs a T-Cell15 replacement.
Reply
I just purchased the pureline T-15 cell. I did all the steps and it is showing power but it is not chlorinating and it has a solid check cell light. I have a Hayward Goldline board and software version shows 1.58. What should I do.
Reply
Hi, Colin. Please provide the system diagnostic reads so that we can see what's going on with the system.
Reply
Do you offer wholesale pricing for a larger quality of this cell as I am in the pool repair business?
Reply
We do not, but a business owner please check back with us if you have created an order history and we can review.
Reply
Thought I had ordered T15 Cell my husband installed and only after check system continues to remain on did we notice that it is a T3 Cell. Will this work yet? Do we have to recalibrate anything?
Reply
Hi, Janet. This cell will work, however, your software revision must be 1.5 or higher.
Reply
I have an Aqua Rite with Software Rev. 1.33. What are my T-15 cell replacement options with Rev. 1.33?
Reply
I am currently running a t-cell-15 with my Naturesoft system rev 1.40. I assume this will work? Also, is the warranty pro-rated?
Reply
Hi Bill, This cell is Compatible with Aquarite Software Rev. 1.5 and higher. Rev. 1.5 was released in late 2008. If you do have rev. 1.4 then you will require the O.E.M T-Cell15 Replacement Cell the warrany is not pro-rated.
Reply
Which cell of yours will replace the Hayward swim pure plus T-cell-15-swp. I purchased the board that was compatible from your company about 1year ago. Also is the new cell the same dimensions so it will replace on pipes without new piping
Hi, Richard. This Pureline T-CELL 15 Cell is compatible with your controller
Reply
have an aquarite t15 cell with the opposite coupling that is shown in your picture how do I speciify which types of connection is needed?
Reply
Does this cell work for any/all AquaLogic systems? I see firmware requirements for AquaRite - what about Logic?
Thanks!
Good day, at this time the Hayward Automation units will not be able to read the Pureline cells firmware.
Reply
My control box Main Software is Revision 2.91.The present Salt cell is a Hayward T-15. Will your replacement T-15 work with my software?
Reply
Lou, yes the PureLine Pureline Replacement T-15 Cell for AquaRite (2 Year Warranty) will work as a replacement for your existing Hayward OEM T-15 cell with revision 2.91.
Reply
Can I clean cell
Reply
Hi Jeff, yes, you can clean these cells. Here is a guide that we put together called "How To Clean a Hayward AquaRite Turbo Cell" that should help.
Reply
Is this unit compatible with the Crystal Pure 3.0 controller if not can it be rewired at the connection to make it compatible since there are non available for the crystal pure at this time. Thanks.
Reply
Hi Lance, No this will not work as a replacement for the Crystal Pure however you can go with this 40,000 Gallon Heavy Duty Crystal Pure Replacement Cell which is in stock.
Reply
I would like to use the Pureline T-15 cell, my Hayword unit is 10+ years old and has the T-cell-15. I'm concerned about the software version, I press the button 7 times and it says r 1.55
Will this Purline T-15 cell work?
Thanks
Reply
Anthony, Yes. The PL7106 is compatible with Aquarite Software Rev. 1.5 and higher.
Reply
Is this unity compatible with Pureline Chlorinating system with software r646? F-15?
-PL7106.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PL7106.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "T-CELL-15 Replacement Cell for Hayward Aquarite Salt System, 40,000 Gallon | By Pureline | PL7106")
Hi Bernard, unfortunately, this cell is not compatible with the Pureline Crystal Pure salt system. If your unit was purchased from 2016 to current and has the option to change the cell version then you can use the cell part number PL7727.
Reply
Just making sure that what I ordered will work with my Aqua-Rite System. I am replacing a T-15 Hayward Cell
Reply
Yes the Pureline T-15 is made to replace your Hayward T15 Salt Cell
Reply
Are the end threads the same as the Aquarite or will different plumbing be needed?
-PL7106.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PL7106.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "T-CELL-15 Replacement Cell for Hayward Aquarite Salt System, 40,000 Gallon | By Pureline | PL7106")
They are the same threads as the Aquarite. I personally have swapped out a Aquarite for a Pureline Cell. Easy to do.
Reply
I need a replacement Salt Cell for Hawward - AquaRite.
Youshow Pureline T-15 for up to 40000Gal Pool. I have a 23000 Gal Pool.
Do you have a T-Cell -9 25000 gal Cell?
And, if so whats the price.
Reply
Hi Jim, Our suggestion for your sized pool is this 40,000-gallon cell. The reason being is that since it generates more chlorine you can dial it down to a lower setting thus getting longer life out of the cell compared to the T-Cell-9 also if you get into an algae bloom situation you can really crank up the chlorine production with this salt cell. Finally pretty much all of the AquaRite Power supplies accept the T-Cell-15 where not all versions of the AquaRite power supply accept the T-Cell-9.
Reply
Since the pureline salt cell is out of stock is their another brand I can use to replace my cell for a 10K pool?
Reply
Hello Jesse. Attached please find a list of AquaRite Chlorine Generator replacement cells for the Hayward AquaRite/Swimpure Salt Water Chlorine Generators. Each of the Cells appearing on the list is compatible with a 10K gallon pool. Prior to selecting a replacement cell, please view the attached Quick Reference Guide, with attention directed to the section Changing Cell Size. Please verify that the Salt System will accept alternative cell sizes.
Reply
I have the PL7106 and the controller is a Pureline also, but I don't know the model number. The controller sees the cell as F-15. The issue I'm having is the salt reading is not matching what the pool has. I had it checked at Leslies and the salt was 2900 ppm. My controller says 6000 ppm. The software number is 647. I tried several times to calibrate the system, but I haven't been successful. Any suggestions? Any way to test the controller or the cell?
Reply
