Upgrade Your Old Pentair Pool Pump to a New Super Efficient and Easy to Operate Century EVO V-Green Variable Speed Motor and hardware kit. The complete includes a 1.65 HP or 2.2 HP motor and gasket kit, as well as an impeller and diffuser, depending on the model of the pump.
Click a Check Mark to View the Matching Kit
Pentair SuperFlo
Pentair Whisperflo Dual Speed, Up Rate
Pentair Whisperflo Dual Speed Full Rate
Pentair Whisperflo Energy Efficient, Up Rate
Pentair Whisperflo Energy Efficient, Full Rate
Pentair Whisperflo Standard Up Rate
Pentair Whisperflo Standard, Full Rate
Pentair Challenger Standard Up Rate High Flow CF Series
Pentair Challenger Standard Full Rate High Flow CH Series
Pentair Challenger Energy Efficient Full Rate High Flow CF Series
Pentair Challenger Standard Up Rate High Pressure CH Series
So with a former WF-28 pump motor, long since replaced, will the MKIT32VS22 work with a century motor now in place? Is this adapter/controller compatible with Pentair’s Easy Touch control system?
Yes, the MKIT3VS22 will be compatible with the WF-28. The WF-28 is a 2 HP uprated, so the VS motor kit’s EVQ225 (2.25 Total Horsepower) motor will work.
The Pentair EasyTouch will be able to turn on/off the EVO V-Green motor, but it will not be able to control speeds. Century plans a control board upgrade compatible with automation systems available in a few months. The motor will be upgradable with a new board post-installation.
Which variable speed motor (Pentair or Century brand) will you recommend to replace my Pentair single speed Y56, 1.5hp Whisperflo pump’s motor?
There are at least two different versions of 1.5 HP WhisperFlo, the uprate and full rate options. What is the model number of the pump housing WF26 (011773) or WF6 (011581)? The MKIT32VS22 WhisperFlo VS upgrade kit will work with either but if your system is set up for the 1.5 HP uprate, you may not be able to run the pump at high speed.
The uprate 1.5 hp has a total HP of 1.65, and the 1.5 HP full rated has a total hp is 2.2HP.