Part # 5064-05
Manufacturer Code 03085602R
INYO # 5064-05 JACUZZI # 03-0856-02-R This is the original Jacuzzi Magnum and Magnum Plus pump housing with drain plugs used on models prior to 02-01-03. This housing may also be replaced by the Magnum Force Housing Assembly.
I need to replace the Jacuzzi Magnum Force pool pump "pot" which appears in the diagram to be the housing. How do I determine if it is manufactured before 2/1/03?
Reply
Hello Rob - You will need to measure the height of your pump basket. If it measures 9" tall, it was manufactured prior to 2-1-03. If it measures 12" tall, it was manufactured after 2-1-03.
Reply
I need to replace the Jacuzzi pot assembly. The original I'm dealing with has a date sticker reading 7-10-02 and the Model No. is 94026107. Only other numbers are one that reads 7MF. Which pot should I purchase as a replacement?
Reply
Hi, This Magnum & Magnum Plus Body will fit the Jacuzzi Magnum Force 94026107 pump.
Reply
can I still buy a magnum 1500 housing or is their areplacement one I can use?
Reply
Hi, The Jacuzzi Magnum 1500 housing can be replaced with one of these current housing listed on the Jacuzzi Magnum Parts page depending on the age.
Reply
We need to purchase a body...housing... for our Jacuzzi Magnum Force 1 hp pump. Will your replacement part 03085602R fit our pump?
Reply
Hi, Depending on the age of your pump and the diffuser style. If you can provide that info we can confirm which body you will need.
Reply
The Most Helpful Review
2 1
(5 out of 5 stars) pump housing
Reviewed By: Frank from St Augustine, Fl. ()
Pros: Looked for replacement for my old Magnum though my pool service. Told that I would need to replace system. This replace worked great.
Cons: Basket was to large for new unit. I should have ordered the full kit.
Great, for replace and saving money. Be sure to note basket size as there are three sizes.
Was this review helpful to you?
The Most Recent Reviews
2 0
(5 out of 5 stars) Perfect fit
Reviewed By: Raymond P. from Las Vegas NV ()
No replumbing required the pump was an exact replacement. Had the entire job completed in less than an hour.
Was this review helpful to you?
2 0
(5 out of 5 stars) Replacement Skimmer/Pump Body
Reviewed By: Gary B. from Romeo, MI ()
Pros: Perfect Fit, Cheaper than replacing the whole pump, Did not have to replumb the system
Cons: None
After being in service for over 12 years, my Magnum Pump developed a leak in the side of the housing that I was unable to repair. This replacement fit perfectly and ended my problems.
Was this review helpful to you?
(5 out of 5 stars) Great Pump Head
Reviewed By: Mike from NW Arkansas ()
Fast service. Great product
Was this review helpful to you?