Model # PL1600
Warranty 1 Year
Same Quality as Hayward®, Pentair®, Sta-Rite®, Jandy®, Jacuzzi® & Waterway®!
The PureLine Pure Flow pool pump is one of our favorite pumps. This work-horse is designed to be energy efficient, quiet, dependable and all of this at a great price.
Click here for 1.5" Quick Disconnect Unions for the Pure Flow Pump
Click here for 1.5" MIP, 2" Socket Long Union for the Pure Flow Pump
Click here for the Above Ground Pool Version of this Pump
Application
Features
Dimensions
Pump Curve
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Will this be a suitable replacement for my Sta-Right original 1HP MOTOR or should I have my motor rebuilt?
Reply
Hi Allen, If you can provide the model of the Sta-Rite pump you have I can firm if this will be a suitable replacement. You can have your motor rebuilt or replace if you'd like.
Reply
Will this model replace my Hayward1:00HP; 1.25 SF; 1.25 THP Model # SPX3210X15Z1PE?
Reply
Hi Jodi for a Hayward SPX3210X15Z1PE I would suggest the 1 HP PureLine Prime Pump.
Reply
Which pump will replace Hayward C48K2N14381
Reply
Hi Ed, I would not suggest this pump as a replacement to the Hayward C48K2N14381 I would suggest the PureLine Prime 1 HP Pump as a replacement for the Hayward Super Pump.
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Pliers
Remove old pump, check the breakers to see if wired for 115 or 230. Simply wrap wires around whichever junctions you are supposed to. The instructions show you. Then repipe and it's good to go. Really easy.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
Less than 1 hr
Screwdriver, Hacksaw, Teflon tape Karma PVC cement, PVC cleaner, one and a half inch PVC pipe and pieces
3 0
First of all I disconnected the power wires and ground from timer. Second I cut out the inlet and outlet pipes from old pump. Third I connected the conduit to the new pump and timer( make sure you know the right voltage of your pump; pump is wired 220v from factory). Fourth I replied the front and top of pump. Finally I filled the pumps basket with water in order to prime the pump, turn on the motor, open the araliz at the filter to get air out and closed it once I got full Prime.
The Most Helpful Review
3 0
(3 out of 5 stars)
Reviewed By: Daniel A. ()
Its a bit weaker than my original pump but it does the job, I was disappointed that I was unable to use couplings in the installation as the inlet outlet sizes are not supported
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Works Very Well
Reviewed By: Inyo Customer ()
Works very well. Very quiet.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
I had a warranty issue with my pump in which Inyo Pools has honored and I am looking forward to a quiet and durable pump.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
I bought this pump a couple of months ago and it recently went out. I contacted Inyo and they replaced it we know hassle . Great customer service. I will use then again
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
WORKS JUST AS GOOD AS THE NAME BRAND NAME JUST REMEMBER TOO PUT A BALL VALVE IN.
Was this review helpful to you?