Part # 35-423-1080
Manufacturer Code PS-601/PS-1904
Dimensions 3.5" L x 1.5" W x 1.5" D
Shaft Seal, PS-1904, 3/4" Shaft, Silicon Carbide PS-601 (PS-601 is a Series of Shaft Seals) PS-1904 Better - Viton Carbon Graphite
(PS-601 is a Series of Shaft Seals) PS-601 Good - Buna Graphitic Plastic
(PS-601 is a Series of Shaft Seals) PS-3986- Better - Viton Carbon Graphite
(PS-601 is a Series of Shaft Seals) PS-3986- Better - Viton Carbon Graphite
Shaft Seal Head Type | B |
Pump Manufacturer | Acura Spa, Jandy/Zodiac, Waterco |
Pump Model | Aquaheat, Aquaheat Plus, Aquamite, Aquastream, HHP/HHPU, Hydrostar, HydroStorm, HydroStorm Plus, Hydrostream, JHP/JHPU, Magnaflow 56, Maverick, MHP/MHPU, Supastream, SupaTuf, Supercharger, Supercharger II |
Quality/Material | Best - Silicon Carbide |
Shaft Size | 3/4" |
Seal Outside Diameter | 1-9/16"dia |
Seal Height | 51/64" |
Mating Ring Diameter | 1-3/8"dia |
Mating Ring Thickness | 13/32" |
US Seal Basic Equivalent | PS-601 |
How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
Hi, I am trying to install this seal in a Jandy Stealth pump but the seat part with the spring and metal cup, when pushed by hand, does not go fully all the way so the top of the cup is flushed with the top of the opening in the mounting bracket.. I put magic lube around the outside of the metal cup before installing. Is it OK to install it like that or should I try to push it fully by hammering the top of the cup with something like a piece of PVC pipe?
Reply
Was there still the metal piece of the old shaft seal left on the impeller shaft when you try installing the new one. If so, you have to take the metal piece from the old shaft seal off before installing the new shaft seal.
Reply