Part # SQ1202
Warranty 1 Year
Voltage 230, Max Amps 230 Volts = 11.2, Single Speed, Square Flange, RPM = 3450, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Options:
Variable Speed - NPTQ270
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Reply
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Reply
How can I get a manual for this pump?
Reply
This is a " Cover All ' type manual that would reference many of their motors. Otherwise, a call to A.O. Smith at 866-887-5216 may be able to e-mail you a specif manual for your motor.
Reply
4 to 8 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench, Hammer, crowbar, chisel
0 1
The old motor shorted out and needed to be replaced. All the equipment is original (1993) for an Anthony DE filter system that still works OK, so I decided to also rebuild the pump assembly (impeller, diffuser, seals, etc.). After removing all the parts and confirming what I needed using the diagrams on the InyoPOOLS website, I ordered this motor along with everything else. The Inyo videos were instrumental in guiding me through the whole process. The new motor and pump work great, and is more energy efficient that the old equipment.
1 to 2 hrs
Screwdriver, Socket Set, Wrench Set
Received pump in a timely manner. Very easy to install if you take your time and follow the instructions on the video. I took the old pump loose and removed wiring. Took the impeller off and put on the new pump. Bolted new pump on and wired it back, said a little prayer and fired it up. Works like a charm.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers
2 0
Called and spoke with a support rep.
He told me I needed a new motor.
Shut off electric breaker to the motor.
Take a picture of the power wire and what terminals they go to
Disconnect wires.
Disconnect impeller assy - mine is a strap that I loosened.
Now you remove the impeller - put here is the kicker - it is backwards thread - not tighty righty - put lucy righty
Unscrew the four screws on the flange and remove motor from impeller assy.
Attach new motor in reverse order above.
When attaching the impeller, just hand tighten it - its made out of plastic and you will break it if you use tools.
Plus when you turn off the motor, the water will tighten it for you automatically.
Less than 1 hr
Screwdriver, Socket Set
1 0
looked all over for a cheaper pump and just happened to run across inyo pools.i gave inyo my #s and they suggested the pump i now have.i looked at you tube to see how difficult it was to change and between them and the staff at inyo ,it was a breeze to change the motor myself.it took me 45 minutes only because i kept going back to you tube to make sure i was doing it right.i cant thank the people at inyo for their help.it will take me 10 minutes next time..this is the cheapest place you will find your pool items and they are very willing to help you thru it ..
The Most Recent Reviews
(5 out of 5 stars) Fit perfectly
Reviewed By: Inyo Customer ()
Fit perfectly
Was this review helpful to you?
(5 out of 5 stars) Pool Spa Motor Replacement
Reviewed By: Old Timer 8 from Elk Grove, CA ()
Pros: Does the job fit & function are good
Cons: Funky motor case extension block
Fit and function are great, except the afterthought of the motor case extension block could be improved to something more practical like a metal or plastic clip-on to the motor support. The adhesive on the provided extension block is useless. I had to shove the block under the motor case and hope it stays in place.
Was this review helpful to you?
(5 out of 5 stars) New Pump
Reviewed By: Shane M. from Reno, NV ()
Great price, service, and fast shipping. Saved hundreds over local dealer.
Was this review helpful to you?
(5 out of 5 stars) Excellent replacement motors
Reviewed By: James T. from Elwood, Ill ()
....excellent replacement motors at a very fair price..easy instructions with "help" available if you're needing guidance...motors run very quiet and seem to be excellent quality...my pool has 5 pumps and is 8 years old...at this point I have replaced two of the pumps and actually have a back-up main motor for when it fails ...the replacement motors run much quieter than my original Sta-brite ones...great company to do business with. JT
Was this review helpful to you?
(5 out of 5 stars) great motor
Reviewed By: Charles B. from pa ()
Pros: well built
Was this review helpful to you?
(5 out of 5 stars) Replacement pump motor
Reviewed By: Mark B. from Towson MD ()
Pros: Quiet, exact fit, shipped quickly
Cons: none
Motor was an exact fit to replace my old one which had failing bearings. All of the things I ordered shipped quickly, and it was the lowest cost I could find. The motor is quiet and works well
Was this review helpful to you?
(5 out of 5 stars) Good pool pump motor
Reviewed By: Johnnie M. from Chapin, SC ()
Motor was exact replacement. Was hard to find other places. Shipment on time
Was this review helpful to you?
1 0
(5 out of 5 stars) Pump replacement
Reviewed By: George C. from Cumming, GA ()
Easy to order and fast delivery. Thank you for your web site with repair how-to videos and text.
Was this review helpful to you?
1 0
(4 out of 5 stars) A.O. Smith 2 HP Square flange Motor
Reviewed By: Kolin from Roseville, CA ()
Pros: Fit right in
Cons: Capacitor cover damaged, poor packaging.
Works great, best price, thanks. The packaging for the motor was not enough to protect the motor. The styrophome crumbled and the capacitor housing was dented in 3 spots, it still worked. Note that I did not even call them about the dented cap cover, I already knew from taking the old motor apart the the cap was fine, the cap is much smaller than the protective housing. I am sure they would have made it right if I asked.
Was this review helpful to you?
(3 out of 5 stars) Can't get parts directly from manufacturer
Reviewed By: Leslie C. from Fallston, Md ()
A part broke when I assembled the motor and impeller. I could not go directly to the manufacturer to get replacement parts. It took several weeks to find an business that could do business with the company. This isn't necessary
Was this review helpful to you?
3 0
(5 out of 5 stars) Good service
Reviewed By: TedB from Mt Pleasant ,SC ()
Pros: Exact replacement for original
Cons: None
Replacement for 14 year old original. Shipped and delivered as promised.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Lance from San Antonio, TX ()
I installed this new motor with no problems. It seems to run more quietly than the replaced one.
Was this review helpful to you?
2 1
(4 out of 5 stars) Do-It-Yourself
Reviewed By: Do-It-Yourselfer from San Diego, CA ()
Pros: great replacement!
Cons: difficult to remove impeller
I very much like this product. Easy to install with exception of removing the impeller. Overall, great replacement motor!
Was this review helpful to you?
203 12
(5 out of 5 stars) Excellent Pump Moter Replacement
Reviewed By: PoJo from Clarence, NY ()
Pros: Awesome fit - excellent replacement
Cons: none
Tip to get the impeller off the old pump moter: use a 7/16" open ended wrench - it slides in near the capacitor on the electrical side... rotate the impeller until the wrench slides into place at the end of the shaft and then one person holds the motor and the wrench while a 2nd person loosens the impeller off with bare hands by turning the impeller counter clock-wise.
Was this review helpful to you?