Part # GLXPCBRITE
Warranty 1 Year
Manufacturer Code GLX-PCB-RITE
Dimensions 9" L x 6.5" W x 4" D
We are now carrying an After Market Main PCB for the Hayward AquaRite for $199.99! Click here to view the After Market Hayward AquaRite Main PCB.
Goldline Main Printed Circuit Board (GLX-PCB-RITE)
This is the main printed circuit board for the Goldline Controls Aquarite salt chlorine system. This is the board that typically goes bad if your unit is impacted by an electrical surge (lightning). Works with the Aquarite 15k, 25k and 40k gallon models.
Take a look at our Reviews tab for feedback from customers regarding replacing this board.
Compatibility:
My aqua rite main circuit board has a part #066012c-1 rev c. what is the replacement board?
Reply
This item here (GLXPCBRITE) is backward compatible with all older versions of the Aquarite meaning that it will work on all versions of the Aquarite.
Reply
Are the glx-pcb-main and the glx-pcb-rite the same?
Reply
Allison, The GLX-PCB-RITE is for the AquaRite Salt System and the GLX-PCB-MAIN is for the AquaLogic Automated Control System. The AquRite would be a standard salt system where the AquaLogic is an Automated Control System with a Salt System. This means that the AquaLogic would normally also control equipment like lights, pumps, air blower etc. The control of this equipment is done through a remote control. So if you have the AquaRite you require the GLX-PCB-RITE and if you have an AquaLogic you require the GLX-PCB-MAIN
Reply
Hi, My pool co says my Power Interface Board is out (the capacitor is cracked). If I decide to try to replace the board myself, which part should I order. Here are some names & numbers he read off the panel: Aquarite Generator, 215 - 230, GLC21011 (Goldline Controls), Part# G1-066012E-1 year 2009.
Thanks,
Chris
Reply
Hi Chris this would be the Aquarite PCB board that you require based on the numbers you provided. We have a Video on How To Replace an AquaRite PCB Board which should make things pretty simple for you.
Reply
I have a 2009 Aqua Rite system (PN: G1-066012E-1) that needs to be replaced. Can you tell me what is the replacement board for it?
Thanks!
Reply
Hi Peter, This would be the correct replacement PCB board for your Hayward AquaRite. This is the newest board and is backwards compatible to all older AquaRite units. We have a good Video on How to Replace an AquaRite PCB Board which should make this repair pretty easy.
Reply
1 to 2 hrs
Screwdriver, Pliers, Socket Set
Turn off breaker supplying Hayward Aquarite.
Remove the cover panel. Remove the display card.
Color by color, pull wires from old board and use the spade connectors to attach to the new board.
Reuse the white plastic mounting pins from the old board on the new board.
You have to pinch the pins near the hole they protrude to release the pins locking device.
Reinstall the display card. Install cover panel.
Make sure the Aquarite displays the correct cell (in my case T 15) BEFORE hooking up the cell.
That fixed it. DIY 1.5 hours.
Less than 1 hr
Screwdriver, Needle nose pliers
We took off the front of the panel.
We saw the fuse and although it was not burned out we replaced it. Still the control panel did not light up.
We talked to Hayward and they do not send parts. Their local store only did new installations.
We called Inyopools, gave them the id for the control system. They told us which part to order.
When the part came, we set about replacing it.
We shut off the power. Then we disconnected the cords to the chlorine generating cell itself.
We simply disconnected the small screen and then disconnected the control board.
After taking the old board out, we transferred the plastic pieces that held the small screen to the new board. Snap out and snap in. Holes were easily identified.
We reconnected the wires just like they were connected to the old board.
We carefully reconnected the small screen.
We turned on the power and followed the inclosed directions to set our cell to t3
We reconnected the two cords to the chlorine generator.
The lights came back on and everything worked just fine!
Less than 1 hr
Screwdriver, Nut Drivers
2 0
Took a picture of the board hooked up, unhooked all the wires , removed 2 screws & changed out the board. Installed the new board, put the 2 screws back in, hooked the wires back up according to where they go & remounted the display.
1 to 2 hrs
Nut Drivers, Pliers
I removed the old PCB board and used the old display and it worked great. However, I assumed the jumpers were the same for 120 ACV and so I just connected the board without realizing the jumpers were different. It worked fine but appeared to run hot. Because it was working fine I ignored the hot situation and it burned out my transformer. I ordered another PCB board and transformer and contacted InYo Pools tech representative and he talked me through the correct placement of the jumpers. It is still working fine.
Less than 1 hr
Nut Drivers, Pliers
1 0
1. Removed all wire connections from existing board.
2. Removed display module and standoffs from existing board.
3 Removed mounting screws from bottom of existing board.
4. Installed new board securing with lower mounting screws.
5. Installed standoffs and display module on new board.
6. Connected wiring to new board.following color codes on board.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Adjustable Wrench
3 0
Everything was working fine, but checked one day and no power or generation lite illuminated but the pump is running. Turned power off and checked the main control unit for any changes but nothing. Turned power back on and both lights came back on but turned off somewhere over a 24 hour period.
Repeated the power off/on cycle and watch the P/G lights which stayed on for about 4 hours then shut off. Double checked all the electrical leads again and cycled the power, more out of not wanting to order a new motherboard and swap the old one out as I have much history with the existing motherboard.
Finally made the decision to get the Hayward Motherborad replacement and followed your video and had it back up and running in two hours. I intentionally took my time and triple checked all the connections to make sure they were correct, otherwise it would have been an hour tops to make the swap. All good and back to normal.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers
Less than 1 hr
Screwdriver
1 0
Electricity Switch OFF
Open the Aqua Rite
Before unplug the main PCB, I took a photograph to leave conections as same as I found them
Unplug the broken main PCB
Plug the new main PCB
Close the Aqua Rite
Switch ON
Restart the Aqua Rite
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
perfect replacement
Was this review helpful to you?
(5 out of 5 stars) Replacement part works great!
Reviewed By: Inyo Customer ()
Affordable replacement and works great.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This one takes a little skill, there is some electrical work swapping wires, and you will also have to carefully swap the display board.
Was this review helpful to you?
(1 out of 5 stars) Didn't last one year. Thankfully it is under the one year warranty.
Reviewed By: Inyo Customer ()
Didn't last one year. Thankfully it is under the one year warranty.
Was this review helpful to you?
(5 out of 5 stars) OEM part .. shipped fast and worked perfectly
Reviewed By: Inyo Customer ()
Fast shippng and worked perfectly
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
fast service
Was this review helpful to you?
(5 out of 5 stars) Fixed my AquaRite Issue
Reviewed By: Inyo Customer ()
Solved my problem.Easy to install.
Was this review helpful to you?
(5 out of 5 stars) inyo came to the rescure
Reviewed By: Inyo Customer ()
this was the key to a successful repair. all is well now. seems the power company spiked the input supply. and hayward was no help after 2.5 hours of phone waiting.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
WORKS JUST LIKE NEW, POOL IS NOW OPERATING AND RUNNING GREAT THANKS GUYS. ROGER/D
Was this review helpful to you?
2 0
(5 out of 5 stars) If I can do it then anyone can!
Reviewed By: Inyo Customer ()
The cost was not that much & it arrived on time (actually before the promised date) . The instructions were easy ( especially for a novice), and the installation did not take that long (was very cautious and re-read each step, 'cause I was nervous about installing this by my self)
Was this review helpful to you?
(5 out of 5 stars) Easy to replace and it worked perfectly the first time.
Reviewed By: Inyo Customer ()
My Aqua Rite system was not working. After minimal research, this board was the fix all for most Aqua Rite systems. I bought it with my fingers crossed. It arrived in about 3 days. Easy to swap out with the old board....and POOF! It worked first time. This new board has a higher revision number than my old board. It just worked. Thank you.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great buy on this panel
Was this review helpful to you?
1 0
(5 out of 5 stars) Easy to install
Reviewed By: Catherine D. ()
I did it myself in about 30 minutes. All connections are labeled. Pretty simple to do.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great equipment
Reviewed By: Steven L. ()
Easy to order equipment; shipped right to our house; equipment in great shape; this website saved us so much money!
Was this review helpful to you?
3 0
(5 out of 5 stars) Replacement PCB
Reviewed By: Earle M. from Millbrook, AL ()
Pros: Easy, clear instructions
Cons: Other models included in instructions
Much easier to install than I had anticipated. Even though the directions included replacement for several different models the steps and illustrations were very clear. The whole process took about 20 minutes (I'm slow) and the system was up & running great.
Was this review helpful to you?
4 0
(5 out of 5 stars) GLXPCBRITE
Reviewed By: Joye B. ()
The "new and improved" circuit board arrived two days after order was placed. It was easy to install and is working perfectly!! Answers to technical questions were provided to us. Thank you so much for helping us and for saving us some $$$$$!!!!!!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: WyMa ()
Easy to install
Was this review helpful to you?
1 0
(4 out of 5 stars) Excellent Replacement Board
Reviewed By: Dan S. ()
Pros: Easy to Install
Cons: Expensive
Easy to install, simple instructions, and functions as expected.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Roy H. from Midville, GA ()
received in timely manner
Was this review helpful to you?
4 0
(5 out of 5 stars) replacement board saved me some $$$
Reviewed By: WILLIAM R. from BEAUFORT, SC ()
Pros: just what it was supposed to be
Cons: delivery time was disappointing
With a $147 for a service call I was still almost $250 dollars ahead with buying the board from Inyopools and putting it in myself. Directions for installation could have been better, but apparently I got it right because it the chlorinator is working again.
Was this review helpful to you?
4 0
(5 out of 5 stars)
Reviewed By: Tony G. from Marietta, GA ()
Pros: easy to install for any do-it yourself type person
Cons: the main power wires into the board, can be tricky
Very simple to install, with a screwdriver and a small socket for the set screws. INYO included extra instuctions for older units. The board itself was an easy replacement, I had a little bit of a challenge with the main power wires due the way they were run into the box. one set went in easy, the other red/black pair took some coaxing, smaller fingers would have been helpful
Was this review helpful to you?
4 0
(5 out of 5 stars) Timely replacement
Reviewed By: Thomas J. from Eustis, FL ()
Pros: Ease of installation without technical assistance.
Cons: None
This circuit board is an updated version of the one that it replaced (20amp fuse integrated within the board). Wiring instructions were clear, and the board was quickly and easily installed by myself. It has since operated perfectly. I saved a lot of money by buying this circuit board online and installing it myself.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: James G. from Orlando, FL ()
The circuit board works wonderfully and the instructions were very self explainitory.
Was this review helpful to you?
1 0
(5 out of 5 stars) the only way to keep pool clean
Reviewed By: ROBERT E. from OCALA, FL ()
Pros: save money
Cons: none
IT fit perfect and only took about 20 minutes to in stall,the pool company wanted 11/2 hrs to come out to cheak it and a 1hr to install it.
Was this review helpful to you?
1 0
(5 out of 5 stars) electronic board is working great
Reviewed By: Kim M. from McKinney, Tx ()
it is working great - chlorine levels are perfect.
Was this review helpful to you?
2 0
(5 out of 5 stars) Save some money
Reviewed By: Tim S from Indianapolis, Indiana ()
Pros: nothing but
This Part is easy to install and will save you allot of money If you have readings on the display but no power light chances are this will fix it. I got this in 3 days via UPS and it was installed in 10 minutes
Was this review helpful to you?
1 0
(5 out of 5 stars) salt is the only to go
Reviewed By: Carl I. from greenville michigan ()
Pros: any one can replace this part with on problem
would no use any thing but a salt geneartor
Was this review helpful to you?
3 0
(5 out of 5 stars) Easy to replace Goldline Main Circuit Board
Reviewed By: handylady from Fullerton, CA ()
Pros: price, easy to install
Cons: none
Easy to install. No reason to pay the local pool store to come out and install for double the price. If you can use a screwdriver you can replace this yourself. Inyo has the lowest price anywhere or will match competitors prices.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: catfish from Naples, TX ()
Pros: All Pros, no cons
I recieved my order promtly and the part was damaged in shipping. I call and the person that helped me knew just what to do and sent out FEDX and sent me a new part.
Was this review helpful to you?
9 1
(5 out of 5 stars) Easy Install
Reviewed By: DCDeano from Sutherland, VA ()
Pros: Easy to install
Lightning destroyed my original board. I called INYO Pool Products and it was in stock, they sent it overnight to my home. In less than 10 minutes it was up and running. Very easy to install and I saved money by doing it myself. I originally called the factory, they were rude and not much help. I called INYO Pool Products, they knew what I needed and were more than helpful. I am completely happy now.
Was this review helpful to you?
(5 out of 5 stars) easy to Install
Reviewed By: Rick B. from Destin, Florida ()
Pros: it was easy to install
remember this is a circuit board so where plastic gloves when handling it
Was this review helpful to you?
(5 out of 5 stars) Nice replacement board
Reviewed By: Grundy from Fayetteville, GA ()
Pros: Fits and works just like new
Cons: directions a little vague
Board works like it should. The directions were a little vague, but everything fit properly and worked as new.
Was this review helpful to you?
1 0
(5 out of 5 stars) Aqua Rite PCB
Reviewed By: Mike from West Covina, CA ()
Pros: Good price. Quick Shipment
Cons: none
This was a good price and quick shipment. I had contacted Haward and ask for the installation documentation. I was told that "Service technicians don't need the instructions so there is none included in the factory box." Easy to follow instructions came from Inyo Pools! I'll be back to Inyo for my pool needs!
Was this review helpful to you?
3 0
(4 out of 5 stars) Updated circuit board
Reviewed By: Grundy from Fayetteville, GA ()
Pros: Easy to install
Cons: price
This is a updated circuit board that is easy to install. Mine was going on 8 years old and failed. This replacement board has slightly different hook-ups but overall about the same. Works fine with the older salt system.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: don't know much ()
The instructions were a little confusing, especially with the change made to the fuse. Unit works great once it is installed.
Was this review helpful to you?
2 0
(5 out of 5 stars) Easy replacement part to make your generator work
Reviewed By: 123bigjoe from Lake Conroe, Texas ()
Pros: easy to change
I called inyopools and they sent the part the next day. This componenet is easy to change if you label your wire. Instructions from Goldline were easy to follow. Easy enough for a DIYer. Thanks
Was this review helpful to you?