Part # W3SP2607X10
Warranty 1 Year
The Hayward Super Pump is one of our best-selling pumps. This is a basic, reliable pump for a single body of water. It can be used for an in-ground pool or spa, or as a dedicated pump for a waterfall.
Commonly Replaced Parts (Click on Link to view/purchase):
Specs:
Hayward Super Pump Application:
Add On Options:
Hayward Super Pump Features:
Performance Data
Hayward Super Pump Overall Dimensions
Click here for more Hayward Pool Pumps
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Options:
Variable Speed - W3SP2603VSP
How many hours per day should I run my pump?
Reply
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
Reply
Can I run my pump without water?
Reply
Hayward Pool pumps should never operate without water. The pump seal assembly in the pump volute (The area between the strainer basket and the pump motor) protects the pump motor from pool water. This seal assembly gets hot and is cooled by the pool water. If the pump is running without water, the seal will overheat and melt, If left running without water for a long period of time, the heat generated could damage the PVC pipe and other system components.
Reply
How much is the power consumption difference each hour between 1.5 HP and 1 HP pool pump by KW.
Reply
A typical 1 HP pump has a power consumption of 1.5 Killowatts per hour (KWH) and a 1.5 HP pump is at about 2.3 KWH
Reply
I have a Hayward SP1607X10. Is that a previous version of sp2607X10? Will parts for one be the same as parts for the other?
Reply
You are correct that is the predecessor to the to the sp2607x10. The parts will work for either pump.
Reply
just want to make sure i am ordering the correct item. my current pump as the model number as SP2607X10 and the serial number as 21120805002046020. its labeled as a hayward pool produtcs item. please advised, thank you.
Reply
Hello Shawn - The Hayward SP2607X10 is the correct replacement pump.
Reply
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Pipe wrench
2 0
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Saw
6 0
After deciding our pump was old enough and worth replacing with the motor, we shopped around and found the best pricing at INYO Pool. My husaband removes the old pump, connected the new pump and the electric. It was great to save money and time by doing it ourselves on our schedule!
Less than 1 hr
Screwdriver, Socket Set
3 0
My old pump was smoking. It was very rusted and I needed to replace the motor. I searched the internet and found the best value with INYO. I had just ordered a new filter (old one cracked when it rains it pours) and was very satisfied with INYOPools service. I took a picture of the wiring before disconnecting the old pump to insure I was able to install the new pump correctly. The new pump was delivered in just 2 days and works great. The screws to remove the back cover of the old pump were rusted and very difficult to remove. I put some grease on the screws of the new pump and covered them with duct tape to avoid this in the future.
The Most Recent Reviews
4 1
(5 out of 5 stars)
Reviewed By: Doug ()
Pros: self priming
Cons: none
Was this review helpful to you?
44 1
(4 out of 5 stars) hayward pump
Reviewed By: pumba from youngstown ohio ()
Pros: great price, durable pump, brand new!
Cons: a little wait for delivery but not bad
mostly i was looking for a better price on a replacement pump for my pool. i save about $150 by ordering from inyopools. i was a bit worried that it might not be what they said, but it was in fact new, in original packaging, durable, warranted, and shipped right to my home
Was this review helpful to you?
1 0
(5 out of 5 stars) hayward super pump
Reviewed By: waterdog from Middle TN ()
Pros: easy to use
We have 22,500 gallon inground pool and this pump keeps the water clean. It was purchased as a replacement and installation was easy with just basic pumping skills. Note:Professional installation is recommended but if you are handy it won't be difficult- I do DYI projects around the house but do not work in this type of trade. It is smooth running with minimal noise,and easy to clean out with a large basket.The Pump itself feels sturdy-not flimsy and has durable cap knobs which stay in place when cleaning out the basket. We've had no problems.
Was this review helpful to you?
7 1
(5 out of 5 stars) Hayward Super Pump Review
Reviewed By: FOWL GUY from Thunder Bay,Ontario ()
Pros: she's all there
Cons: no eletrical plug, in my case
Two couplings and your in business accept for the eletrical
Was this review helpful to you?