$355.70
By Pentair Pool Products
Model # 071314S
Manufacturer Code 355010S
Dimensions 13.5" L x 10" W x 7" D
Pentair OEM Motor WFE-4/WF-26 1HP Almond - 355010S
Motor, Pentair SF/WF, 1.0hp, 115v/208-230v, 1-Spd, SQFL, EE, Full
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Option:
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Reply
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
Reply
I am replacing the pump on a pentair. Which wire goes where?
Reply
Hi Jose, You can review our How To: Wire a Pool Pump for wiring instructions.
Reply
does this come with a gasket
Reply
This motor does come with the small rubber slinger gasket that goes over the shaft but it does not come with the shaft seal or pump gaskets. We would strongly recommend the Whisperflo Shaft Seal and Gasket Kit when replacing your motor.
Reply
Hi,
Can this motor be an upgrade replacement for the motor in WhisperFlo WF26 with the original motor being 1.5hp 1.1 S.F. 8-177475-20?
Thanks.
Reply
Hi, Clement. This OEM motor can be used as an energy efficient option. The THP is the same just uses less energy.
Reply
