Model # JMIRON1
(STAIN SOLUTION #1) is a non-acidic product for removing iron, cobalt, and spot-etching stains from all types of pool surfaces without draining the pool. The Iron, Cobalt & Spot Etching Stuff will normally remove these stains easily and effectively within 48 hours, with minimal rebalancing of other pool chemical products. Dosage: 2 lbs per 12,000 gallons
I have stains in the bottom of my swimming pool. I've used several products but nothing seems to work. Will this stain remover work?
Reply
Before using a stain remover, I would recommend using a stain id kit. It will help you identify the type of stain you have. Once you have identified the stain, you will then be able to use the correct product to remove it.
Reply
How long will the treatment take using the Jacks Magic Stain Solution?
Reply
Generally, if the water chemistry is balanced properly, a jacks Magic Stain Solution treatment should be completed within 48 hours.
Reply
Why did my stains turned black after I used this product?
Reply
Your stains turned black because you likely have copper stains instead of iron ones. Please use our Copper & Scale stuff.
Reply
Is it safe to swim after I use the Iron Cobalt & Spot Etching Stuff?
Reply
No. Do not swim during treatment as the water will not be balanced. You may swim after the stains have been removed and after you water chemistry is back to normal.
Reply
Should I wait for the chlorine to come down on its own before using the Jacks Magic Iron, Cobalt & Spot Etching Stuff?
Reply
No. . By not using a chlorine remover, you will create a chlorine demand which may create an algae problem. By using After Shock you can immediately lower the chlorine level and start the treatment the same day.
Reply
