$30.89

Qty:

By Pureline


Details

Top

Part # 5110-09F

Manufacturer Code SPX3000BN

Dimensions 3.6" X 1.9"

Alternate Part #'s HAY1012059, SP3000-BN, SP3000BN, SPX3000BN, HPPSPX3000BN, PL2746

Product Description

This is an After-Market Diffuser by PureLine for the Hayward Super II Pump™ - SPX3000BN

Frequently Bought with this Diffuser

Diffuser Gasket 5110-08

Magic Lube Gasket Lubricant

Impeller Ring 5110-23

Top

?     Asked on 6/1/2017by Inyo Visitor

Does this come with a new seal?? If not, is the seal included with the tune up kit(gokit) that I bought ??
 Reply

A  Answered on 6/2/2017 by InyoPools Product Specialist Hector F.

These diffusers do not come with the shaft seals but the go kits do.
 Reply


?     Asked on 7/24/2020by Kent Shields

This product is listed with and without the X in the part number. Photo shows without. Is there a difference?
 Reply

A  Answered on 10/27/2020 by InyoPools Product Specialist Hector F.

Hi Kent, fortunately no there is no difference. The "X" is just an alternate part number as many pool products have those. 
 Reply


?     Asked on 5/28/2021by Inyo Visitor

I need an sbx40000 diffuser. Will the 3000 fit?
 Reply

A  Answered on 5/29/2021 by InyoPools Product Specialist Patrick P.

No, unfortunately this will not replace the sbx40000 diffuser. That diffuser is no longer available by the manufacturer without a replacement. It may be time for a new pump, something like one of these Hayward TriStar Pumps if you purchase one of these Hayward Northstar to TriStar Riser Bases then you will have no re-plumbing.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Nut Drivers, Socket Set

Pump was 15 years old. Pool service guy quoted $1500.00 to change it out.

Written on 10/30/2024 by Guest

Took the pump apart (watched YouTube video from Inyo) and it went smoothly. The pump had been installed with no gaps between the fittings on the suction side of the pump. To replace entire pump would've required buying several new pool valves since there was no way to reattach new pump to existing 2" plumbing. Bought replacement pump seal kit and new impeller and backing plate from Inyo. The diffuser had a hairline crack, but it is the easiest part to replace it just rests in place on the seal plate. Seal plate was also cracked along with the impeller. The impeller was broken off the motor shaft. This is why the pump motor ran but did not move any water. For about $110.00 in replacement parts and about 1-1/2 hour of my labor pump is running smoothly again.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.69  out of 5 stars)
16 Rating
5 star:
 
(14)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Helpful Review


The Most Recent Reviews