By Pentair Pool Products
Part # 4650-14A
Manufacturer Code 51516200
Dimensions 2" L x 2" W x 1" D
Drain Cap Assembly - 51516200
Does this cap fit a CP11535 Proline Clearwater? Other numbers on the filter assembly are FC075; FC100; FC150. Thanks!
Reply
Hi Nancy, The Drain Cap w/ Gasket (505-2030) is the correct drain cap for the Proline Clearwater filter.
Reply
This Drain Cap Assembly shows in the parts illustration for the Pentair Clean and Clear 240 filter. Is it indeed the right cap? The current cap look exactly like Drain Plug/Assy part #190030 with the hex nut protrusion on that cap. Or are they interchangeable? Thank you for any clarification.
Reply
Hi. These plugs are not interchangeable, in order to confirm which Plug you need, we will need to know when the unit was manufactured or you can provide a picture of your plug.
Reply
Once again, pictures of my drain plug including a part # stamped on part, for my Clean & Clear Plus 240 filter. Does not look the same in your parts diagram for this model. Need to know correct plug and o-ring to order. The part I was told previously arrived and is incorrect. Hoping for the correct information this time. Thank you.
The filter was manufactured 10/20/2008, CCP240 The plug on it now does not look the same as the one pictured in your parts diagram for filter so not sure if the one on it is the correct one. It is difficult to tighten and leaks some. Maybe a bad o-ring but want to replace plug/o-ring to be sure using correct plug. Current plug is stamped with #154752.
