By Hayward Pool Products
Part # 4041-38
Manufacturer Code SPX1091GW
Dimensions 13-3/4" x 7-1/2"
INYO # 4041-38 HAYWARD # SPX1091GW GENERAL DESCRIPTION: THIS IS A HAYWARD PRODUCTS ABOVE GROUND WIDEMOUTH SKIMMER FACEPLATE GASKET THIS IS A RUBBER BUTTERFLY TYPE GASKET THIS IS ACTUALLY 2 GASKETS JOINED AT THE INSIDE HOLE THE INSIDE GASKET SLIPS THRU THE WALL SKIMMER OPENING AND THE OUTSIDE GASKET STAYS ON THE OTHER SIDE OF THE WALL. THIS IS ALSO KNOWN AS A WALL PROTECTION GASKET, SINCE THE GASKET HELPS PROTECT THE WALL OPENING MATERIAL: WHITE RUBBER SHAPE: RECTANGULAR WITH A TOTAL OF 24 HOLES THERE ARE 9 HOLES IN THE TOP AND THE BOTTOM THERE ARE 3 ADDITIONAL HOLES ON EACH SIDE. THE HOLES ARE SLIGHTLY WIDER THAN TALL (3/-8" X 1/4")
*******************************************************************************
DIMENSIONS: OUTSIDE LENGTH: 13-7/8" (A) OUTSIDE HEIGHT: 7-1/2" (B) INSIDE LENGTH: 12" INSIDE HEIGHT: 5-1/4"
*******************************************************************************
HOLES: THESE MEASUREMENTS ARE FROM THE HOLE CENTER TO HOLE CENTER TOP AND BOTTOM: THERE IS A SCREW HOLE IN THE CENTER THE 2 SCREW HOLES NEXT TO THE CENTER HOLE ARE 2-3/8" FROM THE CENTER HOLE THE NEXT 2 HOLES ARE EXTRA HOLES, 1" FROM THESE HOLES THE NEXT 2 HOLES ARE SCREW HOLES, 1" FROM THE EXTRA HOLES THE OUTSIDE SCREW HOLES ARE 2" FROM THESE SIDE: THERE IS AN EXTRA HOLE IN THE CENTER THERE IS A SCREW HOLE ABOVE AND ONE BELOW THE CENTER HOLE THESE ARE 1-1/16" FROM THE CENTER HOLE THE SCREW HOLES IN THE CORNERS ARE ABOUT 2-1/8" FROM THESE HOLES
*******************************************************************************
MARKINGS: THERE ARE NO MARKINGS
*******************************************************************************
SUBSTITUTES: THERE ARE 3 GASKETS THAT WILL REPLACE THIS THE HOLE PATTERNS ARE THE SAME, BUT THESE JUST DON'T HAVE THE EXTRA CENTER HOLE IN THE MIDDLE OF EACH SIDE OUTSIDE AND INSIDE DIMENSIONS MAY BE VERY SLIGHTLY DIFFERENT 4020-36 PENTAIR / STA-RITE 4095-051 WATERWAY 4031-080 PENTAIR NOTE DATE: 5-7-2009
What gasket fits a sp1091e skimmer? Thanks.
Reply
Hello Jim. The Gasket, Widemouth Sp1091 (spx1091gw) fits the Hayward Pool Products Widemouth Extension SPX1091E. Attached please find the Hayward SP-1091WM Wide Mouth Skimmer exploded parts diagram for reference.
Reply