Product Description

INYO # 4020-36 PENTAIR / STA-RITE # 09656-0152 GENERAL DESCRIPTION: THIS IS A PENTAIR / STA-RITE ABOVE GROUND WIDEMOUTH SKIMMER FACEPLATE GASKET THIS IS A RUBBER BUTTERFLY TYPE GASKET THIS IS ACTUALLY 2 GASKETS JOINED AT THE INSIDE HOLE THE INSIDE GASKET SLIPS THRU THE WALL SKIMMER OPENING AND THE OUTSIDE GASKET STAYS ON THE OTHER SIDE OF THE WALL. THIS IS ALSO KNOWN AS A WALL PROTECTION GASKET, SINCE THE GASKET HELPS PROTECT THE WALL OPENING MATERIAL: WHITE RUBBER SHAPE: RECTANGULAR WITH A TOTAL OF 22 HOLES THERE ARE 9 HOLES IN THE TOP AND THE BOTTOM THERE ARE 2 ADDITIONAL HOLES ON EACH SIDE. THE HOLES ARE 1/4" DIAMETER

*******************************************************************************

DIMENSIONS: OUTSIDE LENGTH: 13-5/8" (A) OUTSIDE HEIGHT: 7-3/8" (B) INSIDE LENGTH: 12" INSIDE HEIGHT: 5-3/16"

*******************************************************************************

HOLES: THESE MEASUREMENTS ARE FROM THE HOLE CENTER TO HOLE CENTER TOP AND BOTTOM: THERE IS A SCREW HOLE IN THE CENTER THE 2 SCREW HOLES NEXT TO THE CENTER HOLE ARE 2-3/8" FROM THE CENTER HOLE THE NEXT 2 HOLES ARE EXTRA HOLES, 1" FROM THESE HOLES THE NEXT 2 HOLES ARE SCREW HOLES, 1" FROM THE EXTRA HOLES THE OUTSIDE SCREW HOLES ARE 2" FROM THESE SIDE: THERE IS NO HOLE IN THE CENTER THERE IS A HOLE ABOVE AND BELOW THE MIDDLE OF THE SIDE THESE ARE 1-1/16" FROM THE MIDDLE, 2-1/8" FROM EACH OTHER THE SCREW HOLES IN THE CORNERS ARE ABOUT 2-1/8" FROM THESE HOLES

*******************************************************************************

MARKINGS: THERE ARE NO MARKINGS

*******************************************************************************

SUBSTITUTES: THERE ARE 3 GASKETS THAT WILL REPLACE THIS THE SCREW HOLE PATTERN IS THE SAME THE HAYWARD VERSION HAS AN EXTRA HOLE IN THE MIDDLE OF THE SIDE OUTSIDE AND INSIDE DIMENSIONS MAY BE VERY SLIGHTLY DIFFERENT 4041-38 HAYWARD 4031-080 PENTAIR 4095-051 WATERWAY NOTE DATE: 5-7-2009