$37.50

Qty:

By Zodiac


Details

Top

Part # 3262-03

Manufacturer Code P15

Dimensions 6" L x 6" W x 1.5" D

Alternate Part #'s P15, POL2013289, PVS, 35-100-1000, PLSP15, POL-201-3289, PVP15, ZODP15

Product Description

INYO # 3262-03 POLARIS # P15 GENERAL DESCRIPTION: THIS IS THE IMPELLER USED ON THE POLARIS PB4-60 BOOSTER PUMP MATERIAL: IMPELLER BODY: BLACK PLASTIC THE FEMALE TREADED PART THE GOES ON THE MOTOR IS BRASS CLOSED FACE OR OPEN IMPELLER: CLOSED FACE NUMBER OF VANES: 5 THE VANE OPENINGS ARE VERY SMALL; ABOUT 3/4" LONG OUTSIDE DIAMETER: 5-7/8" (A) THICKNESS: 7/16" (OUTSIDE THICKNESS AT OUTSIDE EDGE) (B) THICKNESS: 1/8" (INSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 1-5/8" INLET INSIDE DIAMETER: 1" INLET OUTSIDE DIAMETER: 1-7/32" THE INLET OPENING EXTENDS ABOUT 3/8" BEYOND THE IMPELLER FACE SHAFT LENGTH: NO SHAFT BUT THE FEMALE THREADED PORTION IS SURROUND BY A BRASS REINFORCED ROUND SECTION WHICH IS 1-5/8" DIAMETER AND EXTENDS ABOUT 9/16" PAST THE IMPELLER FACE MARKINGS: NO MARKINGS

Top

?     Asked on 3/21/2016by PMM

Will this impeller fit a PB625 motor?
 Reply

A  Answered on 3/21/2016 by InyoPools Product Specialist Matt S.

Yes, this impeller will fit a B625 Motor if it installed on a PB460 Booster Pump.
 Reply


?     Asked on 4/10/2016by mark

will this impeller fit on a PB460 manufactured on 10 04 2014? mdl # 173840xcn
 Reply

A  Answered on 4/11/2016 by InyoPools Product Specialist Hector F.

Yes this is the correct impeller for your pump.
 Reply


?     Asked on 7/20/2016by Eddie Vee

What causes an impeller to go bad?
 Reply

A  Answered on 7/20/2016 by InyoPools Product Specialist Matt S.

Impellers can fail due to debris, striking its face or improper water chemistry. If your pool has sustained high chlorine levels it may deteriorate the impeller's plastic; this is commonly seen in a pump when the pool owner uses their pump or skimmer basket to hold chlorine tablets.
 Reply


?     Asked on 7/18/2018by Miranda

Will this impeller fit my pump from 1997 to 2001 it is an older and original
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Miranda. Yes, this Impeller will fit the Booster Pump manufactured from 1997 to 2001. 
 Reply


?     Asked on 5/6/2021by Rudy

Will this impeller fit a Polaris PB4-60 booster pump made in 2018?

 Reply

A  Answered on 5/7/2021 by InyoPools Product Specialist Danny R.

The correct impeller for your PB460 made in 2018 is the Impeller for PB4-60 - R0536400Unfortunately due to the Texas Freeze this impeller is out of stock at the moment.  We are expecting a new shipment at the end of May.
 Reply


Top

Review Summary

 (Average 4.43  out of 5 stars)
7 Rating
5 star:
 
(4)
4 star:
 
(2)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews