Product Description

INYO # 5190-152 VICO/BALBOA # 1212205 OLD VICO # PPUF10IMP

************************************************

GENERAL DESCRIPTION: CLOSED FACE GRAY IMPELLER, 1 HP THE INLET OPENING IS DOUBLE STEPPED THE SHAFT SIDE OF THE IMPELLER IS FLAT THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE THE THE INLET THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IMPELLER

************************************************

MATERIAL: GRAY PLASTIC TYPE: CLOSED FACE NUMBER OF VANES: 5

************************************************

DIMENSIONS: OUTSIDE DIAMETER 4-1/4" (A) TOTAL LENGTH: 3-3/8" OUTSIDE THICKNESS AT EDGE: 3/8" (B) INSIDE THICKNESS AT EDGE: 1/4" SHAFT LENGTH: 1-7/8" SHAFT DIAMETER: 11/16" INLET OPENING OUTSIDE DIAMETER: 2" INLET OPENING INSIDE DIAMETER: 1-1/2" THE INLET OPENING IS BEVELED INSIDE THE ROUND STEP BELOW THE INLET IS 2-3/8" DIAMETER. INLET OPENING LENGTH: 3/4" (INCLUDING BOTH STEPS) THE INLET OPENING AND THE LARGER STEP ARE BOTH ABOUT 3/8"

************************************************

MARKINGS: STRIPES ON SHAFT STARTING FROM THE END THESE ARE: BLACK SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH NO STRIPES ON THE SHAFT

Review Summary