Product Description

INYO # 5190-035 VICO/BALBOA # 1212215 OLD VICO # PPUL15IMP

************************************************

GENERAL DESCRIPTION: CLOSED FACE GRAY IMPELLER, 1-1/2 HP THE INLET OPENING IS DOUBLE STEPPED THE SHAFT SIDE OF THE IMPELLER IS FLAT THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE THE THE INLET THIS HAS STRIPES ON THE SHAFT TO IDENTIFY THE IMPELLER

************************************************

MATERIAL: GRAY PLASTIC TYPE: CLOSED FACE NUMBER OF VANES: 5

************************************************

DIMENSIONS: OUTSIDE DIAMETER 4-3/16" (A) TOTAL LENGTH: 3-3/8" OUTSIDE THICKNESS AT EDGE: 9/16" (B) INSIDE THICKNESS AT EDGE: 5/16" SHAFT LENGTH: 1-7/8" SHAFT DIAMETER: 11/16" INLET OPENING OUTSIDE DIAMETER: 2" INLET OPENING INSIDE DIAMETER: 1-1/2" THE INLET OPENING IS BEVELED INSIDE THE ROUND STEP BELOW THE INLET IS 2-3/8" DIAMETER. INLET OPENING LENGTH: 3/4" (INCLUDING BOTH STEPS) THE INLET OPENING AND THE LARGER STEP ARE BOTH ABOUT 3/8"

************************************************

MARKINGS: STRIPES ON SHAFT STARTING FROM THE END THESE ARE RED GREEN SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH NO STRIPES ON THE SHAFT

Review Summary