$43.47

Qty:

By Balboa


Details

Top

Part # 5190-036

Manufacturer Code 1212218

Dimensions 4.44" X 0.545"

Alternate Part #'s 1212218, 15-0053, 305062, 354301018, 402637, 5036-05C, 5190-024, 5190-036, 606397, PPUF20IMP, PPUL20IMP, VIC1212218, 35-430-1018

Product Description

INYO # 5190-036 VICO/BALBOA # 1212218 OLD VICO # PPUL20IMP

************************************************

GENERAL DESCRIPTION: CLOSED FACE GRAY IMPELLER, 2 HP THE INLET OPENING IS DOUBLE STEPPED THE SHAFT SIDE OF THE IMPELLER IS FLAT THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IMPELLER

************************************************

MATERIAL: GRAY PLASTIC TYPE: CLOSED FACE NUMBER OF VANES: 5

************************************************

DIMENSIONS: OUTSIDE DIAMETER 4-7/16" (A) TOTAL LENGTH: 3-3/8" OUTSIDE THICKNESS AT EDGE: 1/2" (B) INSIDE THICKNESS AT EDGE: 9/32" SHAFT LENGTH: 1-7/8" SHAFT DIAMETER: 11/16" INLET OPENING OUTSIDE DIAMETER: 2" INLET OPENING INSIDE DIAMETER: 1-1/2" THE INLET OPENING IS BEVELED ON THE INSIDE THE SECOND STEP BELOW THE INLET IS 2-3/8" DIAMETER INLET OPENING LENGTH: 3/4" (TOTAL OF BOTH STEPS) EACH STEP IS ABOUT 3/8"

************************************************

MARKINGS: STRIPES ON SHAFT STARTING FROM THE END THESE ARE: RED SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH NO STRIPES ON THE SHAFT

Product Specifications

Manufacturer:
Sta-Rite/Balboa
Pump Model:
Dura-Jet
Impeller Type:
Closed Face
Impeller Diameter OD:
3-3/4 in
Vane Width ID:
1/2 in.
Eye Diameter OD:
1-3/4 in
Eye Length:
1/2 in.
Impeller Thickness OD:
5/8 in.
Seal Seat Depth:
None in.
Shaft Length:
1-13/16 in. in.
Seal Seat Diameter OD:
None
Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)