By Balboa
Part # 5190-151
Manufacturer Code 1212207
Dimensions 4" X 0.45"
************************************************
GENERAL DESCRIPTION: CLOSED FACE GRAY IMPELLER, 3/4 HP THE INLET OPENING IS DOUBLE STEPPED ON THIS IMPELLER THE SHAFT SIDE OF THE IMPELLER IS FLAT. THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET THIS DOESN'T HAVE ANY STRIPES ON THE SHAFT TO IDENTIFY THE IMPELLER LIKE ALL THE OTHER VICO IMPELLERS************************************************
MATERIAL: GRAY PLASTIC TYPE: CLOSED FACE NUMBER OF VANES: 5************************************************
DIMENSIONS: OUTSIDE DIAMETER 4" (A) TOTAL LENGTH: 3-1/4" OUTSIDE THICKNESS AT EDGE: 7/16" (B) INSIDE THICKNESS AT EDGE: 3/16" SHAFT LENGTH: 1-7/8" SHAFT DIAMETER: 11/16" INLET OPENING OUTSIDE DIAMETER: 2" INLET OPENING INSIDE DIAMETER: 1-1/2" THE SECOND STEP BELOW THE INLET IS 2-3/8" DIAMETER INLET LENGTH: 3/4" THE INLET IS 9/32". THE SECOND STEP IS 15/32".************************************************
MARKINGS: STRIPES ON SHAFT STARTING FROM THE END THESE ARE NO STRIPES SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH NO STRIPES ON THE SHAFT OF ANY IMPELLER
Can this impeller be used as a replacement on a Vico ultra jet 1 hp model PUULSCAS10948 swing pool and spa pump? The dimensions and description appear to match. The pump was purchased approx. 24 years ago. I have not been able to find this model # pump on the internet, Any help you can provide would be appreciated.
Reply
