Part # 4651-22
Manufacturer Code 14930-0032
Dimensions 4.5" L x 4" W x 2" D
INYO # 4651-22 PENTAIR / STA-RITE # 14930-0032 GENERAL DESCRIPTION: THIS IS THE TOP PLATE ASSEMBLY USED IN SOME STA-RITE PUSH PULL VALVES STA-RITE CALLS THIS AN INDEX PLATE MATERIAL: THE ORIGNAL MATERIAL WAS BRASS THE CURRENT VERSION IS MADE OF BLACK PLASTIC SHAPE: ROUND WITH 6 HOLES AROUND THE EDGE EACH HOLE CENTERLINE IS 3/16" FROM THE EDGE EACH HOLE CENTERLINE IS ABOUT 1-3/4" FROM THE NEXT DIMENSIONS: OUTSIDE DIAMETER: 4" (A) TOTAL HEIGHT: 2" (B) CENTER HOLE DIAMETER: 1/2" INCLUDES: TOP INDEX PLATE 2- SPRING PINS TOP PLATE O-RING MARKINGS: 4930-9" IS MOLDED INTO THE UNDERSIDE
1 to 2 hrs
Screwdriver, Pliers, Center punch hammer WD40
3 0
My 30 year old back flush valve needed an overhaul. The brass shaft was pitted, the o rings were bad and the corroded shaft ruined the index plate o ring. So everything needed to go minus the valve housing. Inyo had exactly what I needed and got it to me pretty fast. I figured $1000 in savings by doing this myself. The hardest part was driving the hinge pins out of the valve lever to reuse them. Wd40 is my friend. In about an hour I had a new back flush valve. Now onto cleaning my membrane filter.