Part # 4700-15X
Manufacturer Code SPX0710XBA17
Dimensions 9" x 4"
Key, cover, and handle assembly for Hayward 1.5" multiport valves. Fits the following valves:
This is also available in a white assembly.
Please note, the valve cover o-ring is sold separately as well as the spider gasket, not included in this assembly.
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I have a Hayward pro series sand filter model no s244s with a six position valve. The valve needs to be replaced or repaired . The label on the valve with the model # have wore off, not sure if this is the correct valve. Please advise
Reply
Hi James, You will need to take a look to see if the plumbing going into the valve is 1-1/2" or 2" there should be some digital writing on the white pvc pipe indicating your pipe size. The replacement valve for 1-1/2" pvc is part number SP0710X62. The valve for 2" pvc is SP0715X62.
Reply
I have a triton tr60 sand filter with a hayward vari flow valve model 710. It seems to wear out prematurely the spider gasket and is hard to turn. I was thinking I should replace this assembly. Maybe the coil spring and other parts are worn to help facilitate this problem. Am I thinking right or do I not know how to put a simple looking gasket in correctly? PS We bought house in 1992 and it was here then..Also if needed , do I have the correct one in this diagram?
Reply
Hi Greg, I think you are on the exact path here with replacing the handle assembly. This would give you the complete new top half of the valve. You may want to also purchase the Hayward 710 Cover O-ring shown as Key #6 in the 710 Valve Parts Diagram as this o-ring is not included in the cover assembly. Based on the information you provided this would be the correct cover assembly for your valve.
Reply
We have a Hayward multiparty valve model 710, 75 GPM, 50 psi. Is this the correct key, cover and handle assembly replacement?
Reply
Hi Yolanda, The Key,Cover, & Handle Assy. 1 1/2" Black (SPX0710XBA17) will be the correct the replacement assembly for your Hayward SP710 Valve.
Reply
Does this fit the s244s sand filter
Reply
Hi, The Key,cover, & Handle Assy. 1 1/2" Black (SPX0710XBA17) can be used on SP0710 and SP0712 Multiport valve which cam be used with the S244S Sand Filter.
Reply
Less than 1 hr
Screwdriver, Pliers
I removed the assembly of the backflush and replaced it with the new one. It was not too difficult to do. After I replaced the assembly it still was leaking. Had to find the reason and it is the whole black housing. Just received it in yesterday. Looking to put it in today.
The Most Recent Reviews
(4 out of 5 stars) Handle without o-ring
Reviewed By: Inyo Customer ()
Ordered this handle assembly assuming it came with a new o-ring, based on the illustration. Nope, no o-ring and reusing the old o-ring resulted a bad leak. Took several attempts to find the correct o-ring. Big hassle, but handle works fine now.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great product
Was this review helpful to you?
(5 out of 5 stars) Replace Handle Assy.
Reviewed By: Mark F. from Boyertown,Pa. ()
Pros: Easy installation
Cons: The o-ring isn't included.
My old handle had a constant leak at the top. Till I replaced all the parts it was easier and much less trouble buying a new one. Very happy with the new one fit perfect.
Was this review helpful to you?
(5 out of 5 stars) Key, cover & handle assembly 1 1/2"
Reviewed By: Robert C. from Orlando, Fl ()
Pros: Great pricing and customer service
Cons: NONE
Part arrived in timely manner. Part is installed and working properly.Great service.
Was this review helpful to you?
1 0
(5 out of 5 stars) Good Handle Assembly
Reviewed By: Kevin Y. from alexander city, AL ()
Very easy to install and a lot cheaper than what I could have at a store in my hometown.
Was this review helpful to you?
1 0
(4 out of 5 stars)
Reviewed By: Philip W. from Hephzibah, GA ()
Pros: Excellent customer service
Cons: Quality and Quality Assurance follow-up
Product was received very quickly and in good condition. The only problem was that the label was placed crooked and did not fully seat into the top of the valve assembly. I was not able to remove and reseat it, so it stayed as it was crooked. Need some Quality Assurance completed before sending out a product to customers. The service I received was outstanding. This is my 2nd order from this company and both have been excellent and I would recommend this company to anyone thats need parts, especially if you need them, in a rush.
Was this review helpful to you?
(5 out of 5 stars) replacement pool part
Reviewed By: Formula 280 from Montvale, NJ ()
Brand new part at a great price
Was this review helpful to you?
(5 out of 5 stars) Handle Assembly
Reviewed By: Hans S. from Taylors, SC ()
Pros: Easy to replace
Was this review helpful to you?
2 0
(5 out of 5 stars)
Reviewed By: Mark M. from Bergen County, NJ ()
This part was slightly cheaper than the entire vari flow assembly but was installed in a matter of minuted, rather than an hour or more that would require pulling the whole filter top vari flow apart. Considering replacing the most functional part of the vari flow mechanism without removing a single hose (or two or three). This was a GREAT option to full replacement of the vari flow system!
Was this review helpful to you?