Part # 4802-01D
Manufacturer Code SP0710X62
HAYWARD SP710X62 VALVE
HAYWARD SIDE MOUNT VALVE (1-1/2") USED ON SAND FILTERS WITH 1 PIECE TANK FITS: PRO SERIES; S-210S,S-220S,S-244S,S-310S S-311SX, S-311SXV VALVE COLOR IS BLACK ROUND COVER, ATTACHED WITH 6 BOLTS & NUTS "SP710X62" ON LABEL "SP710XA-13" ON BODY (ALSO FOUND ON OTHER VALVES)
******
DIMENSIONS FRONT TO BACK WITH PLUMBING IS 10-1/4" HEIGHT WITH PLUMBING IS 12-3/4" (EXCLUDING HANDLE) CENTERLINE SPACING ON PIPES IS 6" (AT THE ENDS THE . INSIDE DIMENSION BETWEEN PIPES IS 3-1/2") PORTS ARE 1-1/2" MPT (ABOUT 1-7/8" INSIDE DIAMETER
******
VALVE POSITIONS
*******
PORT ARRANGEMENT
*******
INCLUDES PLUMBING FOR FILTER CONNECTIONS ATTACHED SIGHT GLASS With GASKET (SCREW IN TYPE) (2) O-RINGS FOR FILTER ATTACHMENT (1) BOTTOM MOUNT PRESSURE GAUGE
I have an older hayward s-200 sand filter with a 712 side mount multiport valve that needs to be replaced. Do they make a replacement for it? The number 712 is all that I can make out on the sticker on the valve which has a 6 position selector.
Reply
Hi Tim, The old Hayward S200 filters did use a SP0712 valve which was replaced by the Hayward SP710X32 For 1-1/2" Plumbing and the Hayward SP0715X32 for 2" Plumbing. Either of these valves will attach to your S200 sand filter however the plumbing ports going into the valve may be in a slightly different location than your 712 valve so you may have some re-plumbing. Also there is a Generic Version of the SP710X32 For 1-1/2" Plumbing and a Generic Version of the Hayward SP0715X32 for 2" Plumbing, you will save some money by going with the generic version.
Reply
I have a very old Hayward side mount sand filter model # SLE42082Z1
The model number on my Vari-Flo valve that needs replacing only reads ------X6-- and serial number -20c30-
Is this the correct valve for a direct replacement?
Reply
Hi Ray, The only Hayward Vari-Flo valve which has an X6 in the model # would be the SP0710X62 so I am guessing this is the correct valve for you. If for some reason this valve does not work then you can always return it within 30 days in new and unused condition.
Reply
Is there any way to change the big nut that attaches the valve assembly to the sand filter? Mine is cracked
Reply
Debby, I'm sorry to say there is not a way to replace that nut, you would require a new valve.
Reply
Will the Hayward valve fit a Pentair/Triton sand filter?
Reply
Hi Laurie, This Hayward valve will not fit a Pentair Triton sand Filter. Click link >Triton Valve for suitable valves.
Reply
The Most Recent Reviews
(5 out of 5 stars) Hayward sand filter pool parts.
Reviewed By: Inyo Customer ()
We have an older setup for our pool. It’s really convenient to be able to order the parts that we need.
Was this review helpful to you?
(4 out of 5 stars) Good replacement
Reviewed By: Inyo Customer ()
So far valve has worked nicely. Only disappointment is that it has a plastic site glass. My old one had glass. Unfortunately I broke the old one.
Was this review helpful to you?