Part # 4800-31
Manufacturer Code SX240DN
Dimensions 7-1/8" X 3/4"
INYO # 4800-31 HAYWARD # SX240DN
************************************************
GENERAL DESCRIPTION: PIVOT TYPE LATERAL THIS IS A HAYWARD PIVOT TYPE LATERAL USED ON A NUMBER OF FILTERS. THERE IS A BALL WITH A LOCKING TAB AT ONE END OF THE LATERAL. THE BALL FITS INTO THE HUB AND ALLOWS THE LATERAL TO BE SWIVELED UP AND DOWN TO MAKE REPLACING THE STANDPIPE ASSEMBLY A LOT EASIER. WHEN THE STANDPIPE IS IN PLACE, THE LATERAL IS SWIVELED BACK DOWN TO OPERATING POSITION
************************************************
MATERIAL: VARIOUS COLOR PLASTIC TYPE: SWIVEL PIVOT
************************************************
DIMENSIONS: OUTSIDE DIAMETER 7/8" (A) DIAMETER OF THE MAIN PART THE BALL IS ABOUT 1-1/4" X 1-3/8" THE BALL ADDS 1" TO THE TOTAL LENGTH OF THE LATERAL TOTAL LENGTH: 7-3/16" (B) LENGTH WITHOUT BALL: 6-3/16"
************************************************
MARKINGS: THERE ARE NO MARKINGS
I have ordered a new Hayward St-244T filter and it is should be here tomorrow 5/20/16. I know the top valve is included. Now the stupid question. Is the lateral assembly included?
Reply
Hello Jay, the sand filter is a complete unit including all inner parts and the top mount valve.
Reply
Hi. I need to change the sand in my Hayward S270T2 I am also getting sand in the pool. I may need to change the laterals which it calls for SX240DN. Do you know how can i tell if the unit requires the threaded or snap on version? the unit is about 7 years old. I have attached a copy of the Hayward unit.
Thank you
Hi Harold, I was able to dig up a 2011 Hayward catalog and at that time they were using the pivot style lateral, so I would say you are safe with going with these pivot style laterals if your filter is approximately 7 years old.
Reply
