Product Description

INYO # 5000-3525 PENTAIR # 353525 GENERAL DESCRIPTION: THIS IS AN OVAL SHAPED, CLEAR PUMP LID USED ON THE PAC FAB / PENTAIR RPF 700 HYDROPUMP SPECIAL NOTE: THIS IS SIMILAR TO THE 353625 USED ON THE RPA 590 BUT THIS LID IS LARGER. THE RPA 590 LID IS ONLY 7" LONG

*******************************************************************************

SPECS: SHAPE: OVAL THIS IS FLAT AROUND THE EDGES AND ENDS AND IS DOMED IN THE CENTER THERE IS A 3/8" DIAMETER HOLE NEAR EACH END FOR THE HAND KNOBS ON THE UNDERSIDE THERE IS A CIRCULAR BRACE IN THE CENTER AND 5 STAIGHT BRACES UNDER THE DOMED AREA THE DOMED AREA IS ABOUT 5-5/8" IN DIAMETER MATERIAL: CLEAR PLASTIC MOUNTING STYLE: HELD BY A HAND KNOB AT EACH END LENGTH: 7-7/8" (A) WIDTH: 6-1/2" HEIGHT: 1-5/8" (B) THERE IS A 1/2" LONG FLAT AT EACH END BOLT HOLES: 3/8" DIAMETER, ONE AT EACH END THESE ARE 6-7/8" APART AT THE CENTER OF THE HOLE

*******************************************************************************

MARKINGS: 35-3525 IS MOLDED INTO THE LID AND VISIBLE FROM ABOVE

Review Summary