Part # 5268-03
Warranty 1 Year
Manufacturer Code BN25V1
Dimensions 12" L x 6.5" W x 6.5" D
Century 1.0 HP Thru-Bolt 48Y Motor - BN25V1
Application: Above Ground Pools & Spas Replaces: Sta-Rite, Hayward, American Products, Hydra Bath, Pac Fab, Jacuzzi, Doughboy, Etc... Features: All copper windins, Auto protector, Open drip proof, Stainless steel threaded shaft, Thru-Bolt pump mount, "1081" design, 60 HZ , 115V, HP = 1.0, Full load Amps = 11.8, Frame 48Y, Threaded Shaft
**NOTE THIS MOTOR IS SHIPPED LESS ON/OFF SWITCH. YOU MAY PURCHASE THE ON/OFF SWITCH SEPARATELY BY ORDERING PART # 18374501.**
Note: NOT California Title 20 Compliant.
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Can an on/off switch be added to this motor? My motor is hardwired into my house circuit box and it isn't convenient to run up and down every time I need to turn off the motor. Is there a motor or system that does come with a switch?
Reply
Hi, Sharla. This motor does not come with the On/Off Switch - 18374501. The 1 HP w/ Switch - SPX1510Z1XE comes with the On/Off Switch.
Reply
What is difference between this motor and the BN25ss?
Reply
why change from 2hp to 1hp same number
Reply
Hi, Gary. Some motors have a special (SPL) HP rating based on the pumps application. The SPL rating is different from the motors true horsepower.
Reply
