$9.08

Qty:

Details

Top

Part # 2114-02

Manufacturer Code O-283

Dimensions 3-3/4" ID, 3/16"

Alternate Part #'s 154005, 172009, 33235, 343, 35505-1332, 35505-1425, 355051332, 355051425, 722R0840030, O-2114, O-283, O-283V, O283, R172009, SPP-3430, 90-423-5343, AEQO283, ALDO-283, APCO2449, SPG-601-1144

Product Description

Cap o-ring most commonly used on Pentair / Rainbow inline and offline feeders.

Also used as a bulkhead o-ring on some Pentair and Sta-Rite filters.

Replacement for the following O-Rings:

  • Astral 722R0840030
  • Jandy R0586300
  • Pentair 154005
  • Pentair 172009
  • Pentair 35505-1332
  • Pentair 35505-1425

Frequently Bought with O-rings

Magic Lube O-ring Lubricant

Top

?     Asked on 8/15/2016by Inyo Visitor

How can the O ring become too large for the cap? Otherwise, the O ring looks in good shape??? Confused.
 Reply

A  Answered on 8/19/2016 by InyoPools Product Specialist Stacey M.

Hello, Depending on how long you've had the oring it stretches over time, make sure when you are opening the feeder to use lube to protect your oring and create a proper seal.
 Reply


?     Asked on 4/20/2017by HOLLY HAAS

Will this fit a Rainbow safegard brominator 300?
 Reply

A  Answered on 4/25/2017 by InyoPools Product Specialist Lennox H.

Hi, Holly. Yes, this Cap O-ring will fit a Rainbow 300 Series Safegard Brominator.
 Reply


?     Asked on 7/14/2017by Ray Pughh

will this o ring fit 300 model
 Reply

A  Answered on 7/15/2017 by InyoPools Product Specialist Alex V.

Ray, Yes, this Cap O-ring will fit a Rainbow 300 chlorinator. 
 Reply


?     Asked on 7/21/2019by Robert Winter

Will this fit Pentair Model 320?
 Reply

A  Answered on 7/21/2019 by InyoPools Product Specialist Lennox H.

Hi, Robert. Yes, this o-ring will fit the Pentair Rainbow 320 Chlorinator. 
 Reply


?     Asked on 7/13/2021by Ron

looking for replacement o ring for pentair 320 chlorinator?
 Reply

A  Answered on 7/13/2021 by InyoPools Product Specialist Robert M.

This lid o-ring is the correct one for a Pentair 320 chlorinator.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

Leak in Filter. Replacing All Rubber Gaskets

Written on 2/22/2019 by Guest

Unscrew the fitting to the inlet. Remove the part from the inside. Pull off the old gasket, lube and replace. Screw the fitting back onto the inlet to keep it in place. Easy.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Water leak at chlorinator cap.

Written on 7/3/2017 by Charles B.

Ordered new o-ring from InYoPools. Lubricated new o-ring with silicon lubricant, and installed in cap. Leak stopped/problem resolved.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
15 Rating
5 star:
 
(15)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews