$129.38

Qty:

By Pentair Pool Products


Details

Top

Part # 3290-15

Manufacturer Code GW9503

Alternate Part #'s GW9503, 87-102-1040, PENGW9503

Product Description

Oscillator Assembly Kit w/ Seals - GW9503

Top

?     Asked on 10/24/2015by Inyo Visitor

Can you order just the spring?
 Reply

A  Answered on 10/26/2015 by InyoPools Product Specialist Bob D.

Hello. Unfortunately we do not have the spring by itself available.
 Reply


?     Asked on 10/24/2015by Inyo Visitor

Can you order just the spring?
 Reply

A  Answered on 10/26/2015 by InyoPools Product Specialist Lennox H.

Hi, Unfortunately the spring can not be purchased separately.
 Reply


?     Asked on 4/4/2020by larry parker

does the lower body kit contain the oscillator assembly ?
 Reply

A  Answered on 4/7/2020 by InyoPools Product Specialist Lennox H.

Hi, Larry. The Lower Body Assembly - GW9535 does not include the Oscillator Assembly Kit w/ Seals - GW9503
 Reply


?     Asked on 4/15/2020by Inyo Visitor

I have a great white 9500 and I have changed the suction band and the lift brush, but still the unit will not turn. It will go in a straight or slightly curved path to a wall, climb the wall and then just stay at the surface in one spot for 4hrs. All the mechanical gearing is functioning smoothly, however, the unit will not do any of the random turning
 Reply

A  Answered on 12/1/2020 by InyoPools Product Specialist Megan C.

Examine the lift brush mechanism as the cleaner is operating. To do this, you will have to turn the cleaner over while it is running and submerged. If the lift brush does not move to the “down” position within 2 minutes or less, call Customer Service at 1-800-831-7133.
 Reply


?     Asked on 1/2/2022by Jim

I have a Pentair great white which has normal flow and oscillation, but no longer moves at all. Is it likely in need of a new isolator assembly kit? Thanks
 Reply

A  Answered on 1/3/2022 by InyoPools Product Specialist Craig C.

Hello Jim.  To troubleshoot further, remove the upper shroud, swivel assembly, and handle assembly.  Manually move the oscillator assembly and watch the Cam and Gear Assembly for movement.  The Cam and Gears should rotate and force the Lift Brush into an extended position, then clear, and the brush retract.  If these movements take place, replace the Vacuum Skirt and install a new Oscillator Assembly Kit.  Attached please find an exploded parts diagram for the Great White.  Great White   Further troubleshooting:  increase suction strength at cleaner connection. check filter pressure - low pressure desirable.  change suction source (vacuum port to skimmer)
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Great White pool cleaner stopped working.

Written on 8/13/2023 by Guest

I went online and found an instruction video on YouTube. I was able to remove the old isolator and replace it with a new one that I purchased from. INYOPool.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews