Product Description

INYO # 4641-01 BAKER HYDRO # 31B0005 WATERCO # 31B0005 GENERAL DESCRIPTION: THIS IS THE MAIN SHAFT WITH SPACERS USED IN THE BAKER HYDRO PUSH PULL VALVE GENERAL INFO MATERIAL: SHAFT: BRASS SPACERS: BRASS TOP CAP: BRASS (NOT INCLUDED WITH THIS ASSEMBLY) HANDLE: ALUMINUM (NOT INCLUDED WITH THIS ASSEMBLY) DIMENSIONS: LENGTH: 22" (A) SHAFT DIAMETER: 1/2" (B) SPACERS: TOTAL # 3 SPACERS DIAMETER: 2-1/16" THICKNESS: 1/2" FROM OUTSIDE TO OUTSIDE GROOVE: 5/16" SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 8" 3RD 16" SPACER O-RINGS: (3) INLCUDED OUTSIDE DIAMETER: 2-1/8" INSIDE DIAMETER: 1-3/4" HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 1/8" AT 1/4" FROM END HOLE: 1/8" AT 4-1/2" FROM END ASSEMBLY INCLUDES: SHAFT WITH SPACERS O-RING FOR EACH SPACER MARKINGS: THERE ARE NO MARKINGS

*******************************************************************************

TOP PLATE INFO INCLUDED? NOT INCLUDED INYO # 4641-11 BAKER HYDRO # 31B0002 WATERCO # 31B0002 MATERIAL: BRASS SHAPE: ROUND WITH 8 HOLES AROUND THE EDGE EACH HOLE CENTERLINE IS 5/16" FROM THE EDGE EACH HOLE CENTERLINE IS ABOUT 1-3/8" FROM THE NEXT DIMENSIONS: OUTSIDE DIAMETER: 6-1/8" (A) TOTAL HEIGHT: 1-1/2" (B) CENTER HOLE DIAMETER: 1/2"

*******************************************************************************

HANDLE INFO: INCLUDED? INYO # 4641-11 BAKER HYDRO # 31B0002 WATERCO # 31B0002 MATERIAL: SHAPE: LENGTH HEIGHT: MARKINGS:

Review Summary