Part # 3260-108
Warranty 1 Year
Manufacturer Code SPX2707Z1M
MOTOR (3/4 HP/ 1 HP, HAYWARD BOOSTER PUMP 6060)
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Option:
I was referred over from one of the other questions stating that this model is the replacement for the Hayward 5060. Are there any other additional parts or fittings that I need to order or is this a direct replacement without needing any other fittings?
Reply
Hi Ray, we would suggest replacing your Hayward 5060 Shaft Seal when replacing this motor. Outside of that you should be all set.
Reply
The part # on the original motor is SP2707Z1M, my questions are:
1) Is the P # SPX2707Z1M compatible;
2) Is there anything else worth replacing a this point, I don`t have any leaks at this time.
Thank you very much.
Carlos Formoso
Reply
Hi, Carlos. This SPX2707Z1M is the correct replacement. I would recommend replacing the pump shaft seal and o-rings while you're at it. You will need to provide us with your pump housing model number so that we can locate those additional parts.
Reply
I have a model SP2707X10 and need motor with Mounting Plate
Reply
Hi, Bill. The replacement motor is SPX2707Z1M and the mounting plate is SPX2700EKIT. Other replacement parts can be located on the Hayward MaxFlo II Pump Parts Diagram.
Reply
I have the SP2707X10 Hayward pump and the 1hp motor sounds like it is about to go. What else would I need to replace the motor for this pump? Thanks!
Reply
Hi, Ed. This Motor - SPX2707Z1M is the correct replacement for model # SP2707X10.
Reply
I purchased a Hayward Max Flo II SP2707ZIM pumpon yor order #916989 date 2/6/19. Installation was easy and it worked perfectly after installation on 2/11/19 and It stopped work suddenly on 4/21/19. It just hums and then throws the breaker.
Is it under warrenty?
Reply
Hi, Donald. The motor is warranted for 1 year. The motor will have to be shipped back for inspection and warranty review. I will reach out to the warehouse to get an RMA.
Reply
