Part # 25357-600
Manufacturer Code 25357-600-000
Dimensions 15.5" L x 15.5" W x 3" D
Generic manifold replaces Pentair part numbers 59023700 & 59000400.
Features an integrated air relief screen.
Used on the following Pentair / American Products D.E. filters:
Put in all new filter grids. i purchased from you, the DE keeps coming in pool. do I also need manifold?
Reply
Hi Maurjo, The manifold would be the next part I would replace, we also a have good article on Getting DE Powder Back in Your Pool which goes into the common items to check when getting DE powder in your pool.
Reply
Hi. I have an older American Products "Titan" Model # 56623100 (48 sq ft). Will this manifold fit that model? Thanks in advance for your help.
Reply
I have a Purex Triton FNS 36 filter on my pool. Will this Manifold fit my filter. My manifold has a small crack on it so I will need a new one next time I clean my filter.
Reply
Yes sir, that will fit that filter.
Reply
Hi I have an aquatech D.E. filter that was installed in 1998 for the past two years it has been leaking D.E. back into the pool . Last year I replaced the grids and by researching i feel like the manifold is next to replace . It doesnt appear aquatech is in business anymore and pentair sells some replacement parts for these. the pic you have looks similar to mine. How can i find out if this would be the right part?
Reply
Hi Laura, In order to locate the correct manifold you need we will need to know the model of the AquaTech Filter and or the part number of the manifold.
Reply
Less than 1 hr
Socket Set
1. Turned off pump and disconnected electricity.
2. Removed the top of the filter housing.
3. Removed the Top Manifold.
4. Installed new Top Manifold.
5. Installed the top of the filter housing.
6. Connected electricity.
Less than 1 hr
Socket Set
1 0
I was changing the filter blades on my FNS60 when I noticed the factory manifold at the top was badly cracked on the bottom side.
I'd recommend checking that each time you clean your filters if your unit is over 2-3 years old. Mine was 5 years old.
If you've never replaced the filter blades before, I also recommend turning the assembly upside down and note how the blades are positioned on the base!
Remove the 2 wing nuts on the long rods that bind the filter assembly together and lift the manifold from the filter blades.
If all you are replacing is this manifold, then simply replace the old manifold with this generic which by the way fit perfectly and seems very well built!
Take care in getting the slotted tops of the filter tubes seated into each hole in the manifold and replace the wing nuts as you go to help hold the assembly as you fit the manifold over the slotted tubes.
Snug the wing nuts and you're set!! In my case, recharging the new filter blades with DE was a breeze and less than 2 days later, my pool water is crystal clear!
For my manifold replacement, the only tools needed were a socket and wrench to remove the band holding the filter tank halves.
The Most Recent Reviews
(5 out of 5 stars) Great pool product
Reviewed By: Inyo Customer ()
The manifold top fit perfectly in my filter when my pool guy replaced the old one with this one during the filter cleaning. Moreover, the air bleed is built in as part of the manifold so no need to buy it separately. Great deal! Thanks.
Was this review helpful to you?
1 0
(5 out of 5 stars) Pentair 60 Sq ft DE filter
Reviewed By: Inyo Customer ()
Exact fit for a Pentair FNS 60 sqft DE filter
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Thanks .
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Product works fine. Did not fit perfectly, but works.
Was this review helpful to you?
(5 out of 5 stars) Great replacement
Reviewed By: Inyo Customer ()
Great replacement. Fits exactly like the old one (which developed a crack on top after 14 years of usage.
Was this review helpful to you?
(5 out of 5 stars) Perfect Fit
Reviewed By: Inyo Customer ()
This was the perfect fit to replace cracked piece
Was this review helpful to you?
(5 out of 5 stars) Generic Manifold for FNS Plus
Reviewed By: Inyo Customer ()
Perfect fit replacement for the FNS60 filter pack. My factory 5 year old manifold had a 5" crack on the underside. This generic fit perfectly and seems very well cast.
Was this review helpful to you?
2 0
(4 out of 5 stars) generic grid
Reviewed By: Don K. ()
Have not installed this yet, but looks like it will be a quick replacement. cheaper than the OEM part, but not sure about the lack of a filter cone on top...
Was this review helpful to you?
2 0
(5 out of 5 stars) Good generic replacement
Reviewed By: iflewhi ()
For a year, so far, this product has been working great as a replacement for the original Pentair FNS Plus filter manifold.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Samuel I. from new York ()
Pros: it works good.
Cons: none
perfect fit
Was this review helpful to you?
6 0
(4 out of 5 stars) manifold top replacement
Reviewed By: Markus from Suwanee, GA ()
quick install and hold off calling tech support about shipping the wrong part: the air bleed has been changed to just a perforation of the top wall versus the angled-off little hose piece on the original design. Hard to see from the outside, but performs perfectly fine and might actually last longer.
Was this review helpful to you?
2 0
(5 out of 5 stars) manifold
Reviewed By: Tina N. from Prince Frederick, MD ()
More compact than the old manifold but a little harder to get on the filter grids
Was this review helpful to you?
2 0
(5 out of 5 stars) Excellent inventory of parts
Reviewed By: James B. from Lake Havasu City, AZ ()
Pros: Easy to use website.
Cons: Shipping could be faster
Nice manifold,very well constructed.
Was this review helpful to you?
3 0
(4 out of 5 stars) manifold replacement
Reviewed By: Diane D. ()
Pros: priced right and it works
Cons: needs patience to get the perfect fit.
The part fit but took a little working at it to get everything just right. Now the motor cleans like a dream.
Was this review helpful to you?
(5 out of 5 stars) Outstanding!
Reviewed By: Joe M. from Needles, CA ()
QUICK service (and I live in the sticks), free shipping, the part was less expensive than the OEM part and it works like a charm. What's not to like? Thank you once again INYO POOLS!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: WILLIAM K. from FAYETTEVILLE, GA ()
Product came quickly, it was what I ordered, was high quality and worked perfectly. Thank you.
Was this review helpful to you?
1 0
(5 out of 5 stars) Great new design...Pool looks great!!
Reviewed By: Susan M. from Monroe, LA ()
Pros: Everything as promised/Price was good
Cons: None
This replacement part came on time and was easy to replace. Our pool looks great and the updated design on the part works much better than the old design.
Was this review helpful to you?
2 0
(5 out of 5 stars) Very good product
Reviewed By: Richard S. from Del Mar, CA ()
This product has out performed the original. It is well made and so far, it is doing a very good job.
Was this review helpful to you?
1 0
(4 out of 5 stars) Replacement Manifold
Reviewed By: David C. from Arlington, TX ()
The part was easy to locate on the website. Product arrived as ordered and seems better than the original.
Was this review helpful to you?
7 0
(5 out of 5 stars) Replacement Manifold - Generic
Reviewed By: ARW. from Keller, TX ()
Great experience...outstanding product! I love generics that work. This is my second replacement manifold. The modification of air bleed should make cracking much less likely.
Was this review helpful to you?