$23.22
Part # 001-0600
Dimensions 5.5" L x 5.5" W x 0.3" D
After-Market drive belts by AquaQuality for the Aquabot, Aquamax, Ultramax and Merlin robotic cleaners. Includes 1 pair of belts.
The drive belts tend to wear sooner than other parts, stretching and/or breaking. The belts are located behind the side plate on the drive motor side.
When changing the drive belts, we recommend also replacing the 3 side plate bushings, the 1 drive bushing that rests in the robot body supporting the drive gear, and the 2 stepped rollers. These parts wear down and create slack in the belts, causing them to slip. The inboard and outboard bushings on the drive gear are most susceptible to internal wear and should always be replaced with the belts.
See more Aquabot replacement parts.
Commonly Used on the Following Aqua Products Pool Cleaners
how do you install the belts? are the installed on both sides or just on one side?
Reply
Hi. You can use our How to Replace an Aquabot Classic Robotic Pool Cleaner Drive Belts. These belts are installed on one side only.
Reply