$139.68
Part # PL1072
Warranty 1 Year
PureLine 3/4 HP Replacement Pool Motor for Hayward® & Jacuzzi® Pumps
Is your pool pump motor running loud, leaking or humming? These are all signs that it’s time to be replaced. The PL1072 PureLine Replacement motor is designed as a drop-in replacement motor for some of the most popular 3/4 HP pool pumps like the Hayward® Super Pump, Hayward® Super II, Hayward® Max-Flo, Jacuzzi® Magnum and many more.
The PureLine replacement motor is made of the highest quality components like sealed ball bearings which means it is an ultra quiet motor. Because of its high-quality construction the PureLine replacement motor is backed by a full 1-year warranty.
When it comes to replacing your motor Inyo has you covered we have created a ton of resources to make this project a snap, like our Video on How to Replace a Pool Motor this video walks you through all the steps to replace your motor. Most of our customers decide to tackle this project on their own and by following our video they complete this project in about an hour.
When replacing your motor we highly recommend a tune up kit which includes all the seals and gaskets for your pump. Many times when you use your old seals you may have leaking and seal leakage is one item which will void the motors warranty so make sure to protect your investment with a tune up kit. Below we have listed the tune up kits for some of the most popular pool pumps.
Don't Forget Your Tune Up Kit
Hayward® Super Pump Tune Up Kit
Hayward® Super II Tune Up Kit
Hayward® Max-Flo Tune Up Kit
Jacuzzi® Magnum Tune Up Kit
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
My pool water pump is Jacuzzi 3/4 hp, model/SN is 7CYG / 94028883. The pump is pretty old, made in 2000. Can I replace the motor of this pump with 3/4 H.P Pool Motor Round Flange 56J - PL1072 ? Please let me know. Thanks, Jim
Reply
Yes, the PL1072 would be a replacement motor and part number 5064-16 would be the shaft seal.
Reply
i have hayward super opump model c48j2n131b1 3/4 hp .55 kw rpm 3450 fr 56j is this motor good replesment
Reply
Hi Simon, Yes this would be the proper replacement motor for your Hayward 3/4 HP Super Pump. We would also suggest a Hayward Super Pump Tune Up Kit when replacing your motor
Reply
i have a pool that is 16x32 what size motor do i need?
Reply
Hi. In order to determine what size pump you'll need for your pool follow the steps in our How To: Size a Pool Pump.
Reply
I have a Hayward super pump C48K2DB11A9, 3/4 HP and a Hayward high rate sand filter S-244T. Can I go to a 1 HP motor and if so which one?
Reply
Hi, Kathy. The S244T filter has a max flow rate of 62 GPM, I would not recommend increasing the motor's hp.
Reply
My pool pump motor has pn C48J2N1331B1 and i need a replacement motor. The motor is a 3/4hp. Which one do I need ?
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set, Wrench Set
1 0
First I cut power off to entire system at breaker box. Next I grabbed my 9/16 socket wrench with 3/4 extension and began taking off seal plate to free up motor.
Next I grabbed my 5/16 nut driver and took off back plate of old motor and new motor and from there I disabled the power wires. Next I grabbed a 7/16 wrench and placed on the shaft and began to take off impeller by unscrewing it counter clockwise.
Check your voltage to make sure your 110 or 220, remove old seals and housing and diffuser gaskets. After that I grabbed the new seal kit placing the mechanical seal in proper position and gaskets and began assembly motor back together. Very simple if you know what you're doing.
Once everything is placed in the correct order carefully grab diffuser plate and place on motor and set inside housing. Everything will be marked where you know where it goes, very easy, once inside housing line up screw holes and begin place bolts in housing by hand and then by wrench.
Once good and tight fill up with water close kid and fasten and power it up, should prime right up.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
1 1
Unhooked original motor. Ordered new motor from you all. It was like having a direct replacement. Replaced motor without too much trouble. The pump needed some new parts so I replaced them and now the pump is working again! Thanks for your website and your help.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Worked good for us.
Was this review helpful to you?
(4 out of 5 stars) Received quickly
Reviewed By: Inyo Customer ()
Received quickly. Only issue is the placement of the lugs for the electrical wires. They are a little farther away from where the conduit connects to the motor, so I had to cut the conduit to pull more wire through.
Was this review helpful to you?
(5 out of 5 stars) Pump Working Like Brand New
Reviewed By: Inyo Customer ()
Pump working like brand new. Inyo Pools is my new favorite pool supply store!
Was this review helpful to you?