I currently have a Purex Triton 27-2101 multi port valve for my pool, will this kit PACFAB Hi-flow valve 2" w/ spring and o-rings be able to retrofit my current systemm?
Thanks,
Jon
Reply
Hi Jon, This kit can be used with the PacFab Hi-Flow Multiport valve.
Reply
Hi folks,
It appears I have a Purex Triton valve. It says the Valve top assembly part number is 27-2422 and the paper states it covers assemblies 26-1049, 26-1050, 26-1142.
Will this kit work on this valve ?
Reply
Yes this is the proper kit for your valve.
Reply
I have a Pentair sand filter with a multi-port valve attached. I can't find any part or model numbers on the valve except the label that identifies the valve positions has the number 27-2101 Rev K. However this number doesn't cross with any Pentair models. Can the PacFab Hi-Low Valve 2" w/spring O-ring kit be used to refurbish the valve?
Reply
Hi, George. The Part #27-2101 cross references to the Label for the Pentair - Pac Fab 2" Hi-Flow Multiport Valve. This kit is compatible with with the valve that you have.
Reply
I have a Pentair 27-2101 High Flow 2” valve, will this kit work for my application?
Reply
I have a pentair 27-2120 multiport valve - will this work on my valve?
Reply
Hi James, Could you send us a few photos of your filter? A close of the label on the filter, a wide shot of the filter and a close up of the Valve label? To supply photos simply click the reply link below and upload your photos. Once we get any of this information we can make the proper recommendation.
Reply
I have a Pentair (?) valve cover with the part no. 272422, which replaced the original cover 2016. Is this the correct gasket for that valve?
Reply
I would like to replace the valve portion of my pentair 27-2101 valve going into my salt filter. I would like to remove the 8 bolts, lift it out, replace the star gasket and put a new valve in.
I have a pentair valve control #261050 2" sand - is this the correct replacement kit?
Reply
Hi Thomas, yes this is the correct tune-up kit for the Pentair Hi-Flow multiport valve model 261050.
Reply
does these replacement parts work for a 27-2101 multivalve pentair
Reply
Hi Flora, this will work for your Pentair - Pac Fab 2" Hi-Flow Multiport valve.
Reply
I have a leaking Pentair multiport valve 27-2123, marked 2" HI-FLOW. Its dumping water to waste when its on "Filter". Is this the correct kit to fix it?
Reply
Hello Joseph. Attached please find the Pentair - Pac Fab 2" Hi-Flow Multiport Models 261049, 261050, 261142 exploded parts diagram for reference. The scenario described is typical of a defective Valve Gasket (Spider Gasket). The Pentair Hi-Flow Valve Gasket, Valve 7-5/8"OD, 5 Spokes - 272409 is available singularly or included in the PacFab Hi-Flow Valve 2" w/Spring O-Ring Kit - APCK1073S The additional parts included in the APCK1073S are used to rebuild the Top Valve Assembly if the handle isn't easily manipulated. How To Replace a Pool Multiport Valve Spring
Reply