?     Asked on 7/28/2015by Ron

Do this include control broad too.
 Reply

A  Answered on 7/28/2015 by InyoPools Product Specialist Joe S.

Hello Ron, this will be just the motor with out the drive. That will be part number HCXP3400DR
 Reply


?     Asked on 5/1/2016by Pete MacDougall

DO THEY MAKE A BEARING KIT FOR THIS MOTOR
 Reply

A  Answered on 5/4/2016 by InyoPools Product Specialist Lennox H.

Hi Pete, There is not a Bearing Kit for this motor, however, it will take (1) 6203 and (1) 6204.
 Reply


?     Asked on 6/16/2016by Chris

I have the ecostar sp3400. It make a horrible whine when running. I am guess the motor needs to be replaced? If so, if I order a new motor does it come with everything or do I need to order all new gaskets etc...
 Reply

A  Answered on 6/16/2016 by InyoPools Product Specialist Patrick P.

Hi Chris, you would need the motor on this page as well as this Hayward Ecostar Shaft Seal these two items should get you back up and running.
 Reply


?     Asked on 11/7/2016by Inyo Visitor

What are the bearing numbers to replace in Hayward Motor SPX3400Z1ECM...
 Reply

A  Answered on 11/7/2016 by InyoPools Product Specialist Adam Y.

Good Afternoon Kevin, There is not a Bearing Kit for this motor, however, it will take (1) 6203 and (1) 6204. If theirs anything else I can help you with. Let me know.
 Reply


?     Asked on 12/27/2016by Juan

Similar question to others. Pump is really loud and I assume I need bearings. 1. Do I need a special tool to pull the bearings? If so do you offer such tool? 2. Other than the bearings, what else do you recommend I change at the same time? (ie seals) Thanks,
 Reply

A  Answered on 12/28/2016 by InyoPools Product Specialist Adam Y.

Good morning Juan, Yes you are correct on the bearings. Unfortunately, We do not sell the bearing puller or the pipe you will need to replace. We do sell the bearings they will be #6203
 Reply


?     Asked on 5/23/2017by Mike

Will this pump work on a 3200? I got the pump because it runs either 110v or 220v. I only have 110 at my pool. The 3400 onlu runs on 220v from what i have read. Is this true? Thanks
 Reply

A  Answered on 5/27/2017 by InyoPools Product Specialist Patrick P.

Hi Mike this motor can only be wired 230V and not 110V if you wanted to go 110V then I'm not aware of a replacement 110V variable speed motor. You would need a complete variable speed pump like the Pentair 110V SuperFlo Variable Speed Pump.
 Reply


?     Asked on 6/26/2018by Jeff

Hayward sp3400vsp... I need the fan for the back of the motor along with the shroud that covers the fan. Do you have them for purchase? Thank you
 Reply

A  Answered on 6/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Jeff. The Fan is not sold as a separate part, however, the Motor Fan Shroud - SPX3400FAN is available.
 Reply


?     Asked on 6/7/2019by Rik

I have Hayward Ecostar 2HP variable pump. It has stalled. What is the fix for this? Replace motor or buy new one?
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Michelle B.

Hello, You would need to get a new drive or a new pump in order to fix this issue.
 Reply


?     Asked on 7/4/2019by John

I also need a new motor fan since mine came apart. It's installed with just a simple snap ring. I'm very disappointed that I have to buy a brand new motor assembly when all I need is this plastic fan. Please offer another solution.

 Reply

A  Answered on 7/4/2019 by InyoPools Product Specialist Megan C.

Hi, John. Unfortunately, there is not another solution. The Fan is not available as a separate part.
 Reply


?     Asked on 1/15/2020by Yorente

Is there another drive that would work on a ecostar pump?
 Reply

A  Answered on 1/15/2020 by InyoPools Product Specialist Lennox H.

Hi, Yorente. There is NOT another drive that will work with the Hayward EcoStar Pump. 
 Reply


?     Asked on 5/15/2020by Gregory A Cardino

is this the replacement motor for my older hayward assembly
 Reply

A  Answered on 1/18/2021 by InyoPools Product Specialist Hector F.

Hi Gregory, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or quickest provide them using our live online chat feature. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 5/15/2020by Gregory A Cardino

hello will this motor assembly attach and work to the older hayward system shone in the photo

 Reply

A  Answered on 1/5/2021 by InyoPools Product Specialist Hector F.

Hi Gregory, the correct variable speed replacement motor for the motor included in your photo is the ECM27SQU. You will also need a Pentair Whisperflo seal kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
 Reply


?     Asked on 5/27/2020by Victoria Kaiser

Hello, I (unfortunately) have an SP3400VSP (photos attached) with the replacement digital controller, and now the magnets in the motor have shattered. Is this the correct replacement motor, and is there a recommended seal kit or additional required parts to replace the motor on this pump? Or an alternative replacement pump with the same plumbing layout? Thanks so much!

 Reply

A  Answered on 12/29/2020 by InyoPools Product Specialist Hector F.

Hi Victoria, the correct variable speed replacement motor for the motor included in your photo is this motor without the drive or you can use the ECM27SQU with controls. You will also need a Hayward Tristar seal kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
 Reply


?     Asked on 9/6/2021by Inyo Visitor

Is there a generic motor you can use instead of the Hayward SPX3400Z1ECM for the Ecostar pump SP3400VSP?
 Reply

A  Answered on 9/10/2021 by InyoPools Product Specialist Craig C.

Hello.  The only compatible motor for the Hayward EcoStar Pump SP3400VSP Motor Drive SPX3400DR (or SPX3400DRVR) is the Motor Assembly SPX3400Z1ECM.
 Reply


?     Asked on 1/29/2022by JOHN

I have a TRISTAR VS Model SP3200VSP. Will the SPX3400Z1ECM motor work with this ??? does the connector with three wires on the existing pump snap into the motor drive box on the bottom?? thanks

 Reply

A  Answered on 1/31/2022 by InyoPools Product Specialist Craig C.

Hello John.  According to Hayward, the motor SPX3400Z1ECM is compatible with the Hayward TriStar Model SP3200VSP if the year of manufacture is before January 2019.  If the manufacture date is after January 2019 the Motor and Drive Assembly SPX3206Z1ECM is the replacement assembly.  The Hayward part SPX3202Z1VSPE is the compatible Power End Assembly.  TriStar VS Power End with Display
 Reply


?     Asked on 3/22/2023by jeff lundy

just ordered this pump order # 1391634. i need the shaft seal, orings, etc for installation. is there an installation kit available? or what parts do i need?
 Reply

A  Answered on 3/22/2023 by InyoPools Product Specialist Craig C.

Hello Jeff.  The Hayward TriStar, EcoStar Pool Pump Seal Kit - Model GOKIT81 contains the shaft seal, o-rings, and gaskets necessary to complete the new motor installation.  Attached please find the Hayward EcoStar Pump SP3400VSP Series exploded parts diagram for reference.
 Reply