what is the deferents in the pentair CCRP 150 - 150SF-160355 and the
Pentair Clean & Clear 150 Pac Fab CC150 Pool Cartridge Filter (160317) ad which one would be better for 24' x 54" round above ground pool with pentair vs 1 1/2 hp pump
Reply
Hi, Clifford. The CCRP-150 - 160355 filter discharge is raised from the inlet versus the CC150 - 160317 discharge is linear to the inlet. I would recommend the CCRP- 150 filter because the design maximizes filtration and water flow.
Reply
We are having a pool installed. Will model # 160355 be big enough for a 16 x 36 in ground pool? It seems small and the chart shows it is for 150sq ft.
Reply
Good morning Mike, I would at least go with the 200. You can also save a lot of time and sweat if you went with a D.E filter or a Sand filter. You would get more time out of it. Plus you go from cleaning to simply Back washing.
Reply
how to clean the cartridge
Reply
Hi, Juan. You can follow steps in our How To Clean a Pool Cartridge Filter guide for cleaning info.
Reply
What is the difference between the Pentair 160355 RP and the Pentair 160317? I have a 15000 gal. in-ground pool with a 1.5hp variable speed pump; 1.5" pvc plumbing, with two inlets (skimmer and cleaner).Will one filter system work better than the other?
Reply
The location of the side port on the Clean & Clear RP makes the pump operate much more efficiently. I would suggest the RP as the filter is much more efficient.
Reply
I have a 30’ above ground. Came with a Sand filter which has made cleaning a pain due to water waste having to vacuum to waste. Which would be the best Cartridge Filter for the 30’ round pool?
Reply
Hi, Buddy. Filter's are sized based on the pump's performance or flow rate. This 150 Sq.ft. Cartridge filter will be sufficient is your pump does not exceed a flow rate 150 GPM.
Reply
Is this filter properly sized for a 10,000 gal. pool and a Pentair 1 hp pump?
Reply
Rodney, this filter would be more than sufficient for your pool it might be a little overkill for your situation. I would suggest getting the Clean and Clear RP 100 (CCRP100) - 160354. This filter would be a better fit for your pool.
Reply
I have a 33,000 gallon pool, would this filter be sufficient to handle this size pool ?
Reply
Hello, We would need to know the model number of the pump. If the pump is too large, then we would recommend a different filter.
Reply
I have to replace my old Starlight stainless steel cartrigage (135) filter. Can't find parts anymore. My pool is 25,000 gallons. It has a pentair Intelliflo Variable speed pump. We live in Palm Desert, CA. I have to replace it with another cartridge filter. What do you recommend?
Reply
Hello, This will be the filter we would recommend. http://www.inyopools.com/Products/03501213000150.htm
Reply
I have a 16 x 35 in ground vinyl pool that currently has a sand filter that I would like to replace with a cartridge filter. I have a Hayward variable speed pool pump. 1.85 THP. Which filter would you recommend and how soon could I receive it?
Hi Marc, For your size pump and pool we would suggest the filter which is one size up from this which is the Pentair 200 Sq. Ft. Clean & Clear RP Filter
Reply
Dose this unit come with filters
Reply
Hello Dave. The Pentair Pool Products Clean & Clear RP150 Cartridge Filter Comes complete with the RP150 filter element (1 required). The unit is ready for installation, no additional parts are necessary.
Reply
I replaced a hayward sand filter with this cartridge filter. How can I set it up to vacuum to waste? Do I need a bypass valve? What do you reccomwnd?
Edwin Evangelista
Reply
Hello Edwin, this filter does not have a vacuum to waste set up however here is our "How To Add a Pool Waste Line" guide that should assist you with setting one up.
Reply
