Does the Pentair 1.5 hp motor require additional seals or is it installation ready? Do you offer gasket or o-ring kit for the Pentair Whisperflo system?
Reply
Hello Mike - The motor does not come with any pump gaskets or o-rings. The gasket/o-ring kit for standard chlorine pools is part number GOKIT32. The kit for saltwater pools is GOKIT32SALT.
Reply
hi can you confirm the bolt pattern. Mine is a six bolt two at the top that screw directly into the strainer side, two in the middle that screw thru to the strainer side but into separate bolts and two at the bottom that attach the same as the top two. Looking at your picture it does not appear it has middle screws?
Thanks
Reply
Hello Del - The motor connects to the plate with four bolts. Once the motor is connected to the plate, the plate is connected to the housing with six bolts. The Whisperflo Part Schematic will illustrate this.
Reply
I have a 15 year old WisperFlo WFDS-6 which is starting to make a bit of noise. Can I change out to this motor? Will I save on electricity usage by doing so? Will the EE last as long?
Reply
Hello Darren - The 071315S motor would be the correct single speed motor replacement. You currently have a dual speed motor. The dual speed motor would last longer and be more energy efficient. The dual speed motor is model B2983.
Reply
What would be a great replacement for a Pentair WhisperFlo WFK-6 1.5 HP? After 15 years of service,it has expired.
Reply
Carolyn, You can replace it with the same Pentair WhisperFlo WFK-6 1.5 HP 3 Phase Pump, lead time would be 5 business days for shipping. Let me if you would like to place order.
Reply
I have a Pentair WFDS-26, Part No. 012518. The motor is making a loud squealing sound, The pump runs fine, just loud. I would like to replace the motor with a single speed. I do not use the two speed function. What motor would I need to buy?
Reply
Hi Jim, You would require the B859 Replacement Motor. We would also suggest the Pentair Whisperflo Tune Up Kit when replacing your motor.
Reply
i have a pump wfe-6/011514, 208-230 vl,,,,,and i have it on a 20 amp circuit ,,i need to add another pump and will like to know the watts that this pump suses when operating to see if i can put the other pump on the same power circuit or if i need to add anoder dedicated circuit..i want to have the 2 pumps operating at the same time on the same pipe line to pump water to my roof 19 feet up to my sunheater ,,would you guys recomend to do this???
Reply
Hi, The WhisperFlo EE 1.5 HP Motor Full Rate (Almond) when wired for 230 volts uses about 8.8 amps. Instead of using 2 pumps you may want to look into the IntelliFlo Variable Speed Pump.
Reply
I have a Pentair Whisper Flow WFE-26 / Part No. 011518/ Motor# 177450. Is this product a direct replacement for my motor? Also, my pool is saltwater, which tune up kit should I purchase if I purchase this motor
Reply
Hi Cabo, This motor will be the OEM replacement motor, and p/n GOKIT32SALT would be the Pentair/Purex Whisperflo Saltwater Tune Up Kit.
Reply
I have a purex whisper flo pump with a magnek century centurian a electric motor part number 8 177450 03 rpm 3450l serial no bn4 213. I'm looking for a replacement motor to fit m you pump do you have this pump thank you.
Reply
Hi Joe The B2841 Whisperflo Motor would be the proper replacement motor for the 8-177450-03 we also suggest a Whisperflo Shaft Seal Kit when replacing your motor.
Reply
I have a Pentair WFDS-26 dual speed pump part no 012518. What is the replacement motor part # and the tune up kit for this motor? Salt water
Reply
Hi Dwayne, You would need the UQS1152R WFDS26 1-1/2 HP Dual Speed Replacement Motor and this Whisperflo Tune Up Kit. Please note that the UQS1152R does not come with a toggle switch, if you do need a toggle switch then I would suggest this Whisperflo Dual Speed Motor with Digital Controller
Reply
I have the Pentair WFE-4. The motor sounds like it is going bad. I believe I need a bigger pump for my pool size. Could I replace with the 1.5HP without a big overhaul?
Reply
You will need to change the impeller to the Impeller, 1 1/2 Hp Full 2 Hp Up. (073129) if you upgrade to the higher 1.5 EE Full Rate Motor. We will also recommend you replace the seals with the Tune Up Kit Pentair/Purex Whisperflo.
Reply
My pump motor(whisperflo) is making noise. What motor and parts(kit) will
I need. The motor says 1.5 HP and Also 1.65SFHP.
Reply
Hi, To get your pump up and running like new you will need the B2845 along with the Whisperflo Tune Up Kit p/n GOKIT32 or GOKIT32SALT.
Reply
I have an older WhisperFlo WF-6. Is this the correct replacement motor? If so, is there anything else I would need besides the GOKITSALT tune up kit (I have a salt pool)?
Reply
Hi Marc, If you don't mind a black motor instead of an Almond motor then the B858 Motor would be a better match and it is less expensive. You would need the WhisperFlo Tune Up Kit - GoKit32Salt and that should be all you need. We also have a good Video On How to Replace a Pool Pump Motor which you may find helpful during your motor replacement.
Reply
What is the salt water kit and what does it protect that the standard motor does not? I have (2) Whisperflo 1.5 H.P. pumps with this motor, (same specs) and I have a saltwater pool. One pump runs the pool and one pump runs the waterfall. Every place I talk to, (at the shops in my area), tell me there is no difference in a pump motor for a saltwater pool vs standard (non-salt) pool. I need to replace one of the motors. Does this motor require a salt water kit? Thanks for the help
Reply
Hello, when it comes to installing a new motor in a saltwater pool I would highly recommend getting the saltwater tune-up kit if you have a saltwater pool. This is because the minerals in the salt water tend to degrade the o-rings and shaft seals quicker. The tune-up kit aimed at saltwater pools helps to slow this degradation.
Reply
I have a Pentair WhisperFlo WF-26 (Part #011773) for my salt water pool and need to replace the motor…will this item fit as a replacement and is there a gasket kit I would need? Thanks!
Reply
Hi. This will fit, however, is not the correct OEM replacement. You will need p/n 071314S along with the Whisperflo Tune Up Kit - GOKIT32SALT.
Reply
Hello, I have a WFE-26/ Part No. 011518/ Motor #196233, I only need to replace the motor. Will this motor work for my salt water pool? Thank you
Reply
I have 2 questions I wave a WDFS-6/011522 that has gone kaput. First, can I use a single speed 1.5 HP replacement motor and leave the balance of the pump in place (impeller, etc.). If so, which motor? If not, what is the correct dual speed motor? I guess that's questions. Thanks,
Steve
Reply
I need to replace my Whisperflo EE 1.5 HP Motor #071315S and the Seal Plate-WFE #5074-18A. What other parts, seals, o-rings, gaskets and lubricants will I need.
Reply
Hello, This will be the seal kit you will need for your pump.http://www.inyopools.com/Products/00500005003532.htm
Reply
I need a replacement for a WFE-6 motor, which would that be. Almond color would be preferred if available. Thanks.
Reply
Hi Dave, This is the correct replacement motor in Almond for the Pentair WFE-6. You will also need a Pentair WhisperFlo Seal Kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
I need a motor for a WFE 4 pentair, It says a US motor 230volts/115 volts EB 841A 1081 Pool motor, with new seal.
Reply
Hello - your replacement motor is the 1 HP Square Flange 56Y Full Rate EE - B2841V1 and the seals and gasket kit for your Pentair WhisperFlo is the GOKIT32 or GOKIT32SALT.
Reply
Can a variable better energy consumption be put into that pump?
Reply
help is there a Pentair replacement motor for the whisperflo WFE-28 2HP, I see all others but the 2 HP
Reply
I am looking for a replacement Motor for a Pentair WFE-6/ 011514 1.5 HP ALMOND COLOR
Reply
Hi Joe, This is the correct replacement motor in Almond for the Pentair WFE-6. You will also need a Pentair WhisperFlo Seal Kitwhen you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
i would lso like to replace my old Impell
Reply
Hi Joe, please click here for your WFE-6 Impeller we do have this impeller in stock ready to ship! We also suggest this Whisperflo Tune Up Kit when replacing your motor.
Reply
I have a Pentair Whisperflo WFE-26 - 1 1/2 HP - and need to replace the motor. Which part shall I use, knowing that it is powered at 110V (not 220V).
Thanks!
Chris
Reply
Hi Chris, We would suggest this B2854 Replacement Motor which can be wired either 110V or 220V. You will also need this WhisperFlo Seal Kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
I have a Pentair model number for the motor 355012S that needs replacement. The house was sold. The pool working was a contingency for the sale. What is the least expensive cross reference that can be used?
Reply
Hi Carson, the direct single speed replacement at the best value that we carry for your motor model 355012S is the B842. It is also recommended to replace the seals when replacing a motor. In order to locate those, we will need the front pump wet end housing model name or number that the motor attaches to. You can also reply to this with images of the housing if you need.
Reply