I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
Will this valve fit the Nautilus NS-36 stainless steel filter?
Reply
Hi Antonio, Yes this multiport valve does work on the Nautilus NS-36 stainless steel filter.
Reply
So, maybe. I only need to change the top of the valve instead the whole valve..
Do you have the top of the 261177 Multiport? If yes, please stated price & shipping conditions to Puerto Rico.
Reply
Hi Ramon, yes we do carry the Top Half of the 261177 Valve if you go this route you will also need the 261177 Spider Gasket.
Reply
I am looking for the top part of a valve. It is the part that has the different options on it like backwash and rinse. It is for a Pentair 8 position multi-port valve and has a label # 96734200.
Reply
The top lid part number for your valve is part number 4659-25d and the handle is 4659-21c. These do not come together pre assembled unfortunately.
Reply
My multi port valve is leaking, and I think I need to replace the spider gasket. What is the part # for the spider gasket for this valve? Thanks!
Reply
I have a pacfab 50psi and 75 gpm 6 port valve for a bs 36 filter I need to replace the multi port what should I use?
Reply
Hi Vince, If you have a PacFab NS 36 Filter and have 1.5" pipe, the 1.5" Threaded Multiport Valve for D.E Filters will work with your filter.
Reply
Is the lid assembly available for the pentair 261177 the rest is fine probably need gasket to
Reply
Hi, You can find the replacement parts for this valve via the Pentair - Praher 1 1/2" TM12 & SM10 Parts. The Cover (4600-1165) and Spider Gasket (4600-1104) will work with the Pentair 261177.
Reply
Will this work with a Stainless Steel PacFab Nautilus NS-48?
Reply
Hello, Victor. No, the correct replacement valve is the Valve,sm W/plumbing 1 1/2" P.f. D.e. (sm1-pp2) or the Valve, Sm W/plumbing 2" P.f. D.e. (sm2-pp2) depending on your plumbing size. Please click here to view all part available for the Pac Fab Nautilus Stainless D.E.
Reply
I have the Hayward 6 position vari flo on my Triton DE filter. I need to replace the valve. It appears the original install required them to plump the valve so the Hayward would fit the filter it appears to be I think 8 inch on center to the filter side mount. Help
Reply
Could you attach some pictures of what you have so I can see what you are working with so I can recommend the correct valve for you?
Reply
Will this fit my Titan DE filter?
No this is not the correct valve. You will need either this 1.5" Titan Filter Valve or this 2" Titan Filter Valve. 1.5" or 2" refers to the size plumbing that is going into the valve.
Reply
will this multiport valve fit a Triton TR60, sand filter?
Reply
We do not show that model valve listed for the TR60 parts list however please click here to view the valves listed at key 39 on the Pentair Triton II Fiberglass Sand Filter parts diagram.
Reply
What would be the correct replacement spider gasket part for this valve.
Reply
Hi, Thomas. The Diverter Gasket - 271104 / G-416 is the correct replacement spider gasket for this valve.
Reply