Can this switch be used on a Century BN34V1 motor?
Reply
Hi, The Toggle-two Spd Switch (18313301) can be used on the 1-1/2 HP 2 Speed 230V Thru Bolt Motor (BN34V1).
Reply
Will this switch on a waterway 2.5 horsepower pump. My toggle switch has broken off.
Thanks for all of your help! The products I've purchased from you has always worked GREAT!
Reply
Hi Mike, This Switch can work on a certain Waterway pumps. However without know which model you have we're unable to confirm. If you can provide the model number or motor no. we can confirm.
Reply
Will this switch work with a Waterway pump Model PH2150-6p..2 speed..if not where can I get one?.. Thanks
Reply
Hi Vincent, This can work with the Waterway PH2150-6P model pump depending on the end cap that you have. This will not work if you have a switchless motor.
Reply
Will this switch work with the 56 frame B 2982 Century motor?
Reply
Hi Dan, The correct toggle switch assembly for the B2982 motor is p/n 2512558-001.
Reply
Probably a silly question, but how hard it is to install this separately? I will be ordering a BN50 soon, but the last replacement pump I order through another company already had the switch combined with it.
Reply
Haley, The switch is not difficult to install. You can use this how to guide for reference.
Reply
I just purchased a bn36 motor and need a 2 speed toggle switch only.my switch broke off on my original motor.
Reply
Hi, Pete. This 2-SPD Toggle Switch - 18313301 will fit the Century BN36 Motor.
Reply
Does this switch work inplace of Intermatic switch #RC 2343 pt ?
Thank you! Siegfried Zapp,I don't mind the manual switching.
Reply
Hi, Siegfried Zapp. This Toggle Switch Assy can be used if you have a compatible motor bypassing the RC2343PT controller.
Reply
This switch replaces Intermatic air switch #RC 2343?,does it include installation installation instructions?
Thank you, Siegfried Zapp
Reply
How does the 18313301 Switch wire into A O Smith motor B2979
Reply
Hi, Jack. This Toggle Switch Assy - 18313301 is not compatible with the B2979 motor, you will need the 56Y 2-Speed Toggle Switch Canopy - 2512558-001. Use this link for Wiring Instructions.
Reply
I was looking to replace my SP1500FT Microprocessor Pump Timer but see it is no longer available. The Q&A on that page directed me here. My pump is the Hayward SP1515-Z-1-EFTC. I believe it is single speed only. Will this 2 speed switch still work properly? If not, what is recommended?
Reply
I have a Hayward as seen in the pictures. Is there a way I can convert my single speed motor to a 2 speed motor or will I need to replace the motor altogether.
Unfortunately, you will not be able to make that single speed motor a two-speed. The only route is to start with a whole new dual speed motor; which would be the BN50V1. The shaft seal to complete the motor installation is 5111-03.
Reply
Will this switch fit the Hayward SP3215X202 2 HP Pool Pump, Dual-Speed, TriStar? Thanks
Reply
Doug, yes, the Two-Speed Toggle Switch Assy. - Lo/Off/Hi - 18313301 will fit your SP3215X202.
Reply
Will this toggle switch work on the A.O. Smith 1.5 HP Round Flange 56J Dual Speed Full Rate Motor - STS1152R?
Reply
Hello,This will be the correct toggle switch,http://www.inyopools.com/Products/00201352046334.htm
Reply
Will this work on a Century A.O. Smith B977 56J C-Face. If not, do you have a part that will. Thank you.
Reply
Hi, The switch you will need for the B977 motor is the Toggle Switch and Canopy Kit for 56Y 2-Speed - 2512558-001.
Reply
I don't need the entire assembly, I just need the appropriate toggle switch for a Waterway 2 Speed 115V 1.5 Hp Spa Pump that I use for my pool.
Reply
We will need the motor model, CAT, or Part number to check for the toggle, a majority of motors require the canopy with a toggle to be ordered. If the motor is the originally installed with the Waterway pump you will need to contact them directly at 805-981-0262 for the part number, they have their motors private labeled and will need to provide it.
Reply
I need the switch and an outside cover for a MagneTek Century AC motor. Part 7 193077 01. It's for a Hurricane Jucuzzi pump. Do you have one?
Hi Kim, This switch on this page is the correct replacement switch for the motor included in your photo.
Reply
Hello, please see the attached picture and let me know if this 2 speed switch is the correct one.
Hello Kenneth, the correct toggle switch for your motor part number B975 is part number 2512558-001. It is currently out of stock however you can add yourself to the "notify me when in stock" list on the items page. You can also use a secondary dual speed timer part number T106R which piggy backs off of the main pool pump timer.(most pump use one)
Reply
Will this switch work with a Century 1.5 HP Thru-Bolt 48Y Dual Speed Motor - BN50V1?
Reply
Hi Sasha, yes this toggle switch is compatible with the motor model BN50V1. I also have emailed you a quote attached to your account with us that you can convert to an order if you would like as well.
Reply
Is this 2-Speed toggle switch compatible with my Hayward Power-Flow Matrix 1081 Pool Pump Duty motor? See attached picture. Thank you.
Hello Jasso, You will need the On/Off Switch Assembly - 18374501 since your motor is single speed. I have also emailed you an estimate that you can convert to an order if you would like. Item is currently in stock and ready to ship.
Reply