?     Asked on 6/6/2015by Ken

have a constant leak out of waste discharge line,\backwash. . when on filter setting, what part should i replace ? water diverter or can i install in-line ball valve to stop the leak without damaging any other part of the filter ?
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Patrick P.

Hi Ken, We would suggest replacing the diverter as this is a sign of a bad diverter and spider gasket and could be causing issues elsewhere. Do you know which model filter you have?
 Reply


?     Asked on 8/28/2015by gary

is this the replacement part for Jacuzzi 225L
 Reply

A  Answered on 8/28/2015 by InyoPools Product Specialist Lennox H.

HI Gary, The 5 Position Dial EQFV Valve  can be used on the Jacuzzi 225L Sand Filter.
 Reply


?     Asked on 12/9/2015by Inyo Visitor

Will this fit a jacuzzi A250L sand filter?
 Reply

A  Answered on 12/9/2015 by InyoPools Product Specialist Charlie R.

Yes, this valve will fit a Jacuzzi 250L Bolt on style filter.
 Reply


?     Asked on 4/17/2016by nancy

What position should lever be when sweeping pool
 Reply

A  Answered on 4/18/2016 by InyoPools Product Specialist Lennox H.

Hi Nancy, The valve should be in "filtration" mode.
 Reply


?     Asked on 5/25/2016by Nancy Dellin

Do you have a replacement dial for Jacuzzi Laser250-6/A sand filter, Jacuzzi Model 9408-6030?
 Reply

A  Answered on 5/25/2016 by InyoPools Product Specialist Patrick P.

Hi Nancy, Yes the Jacuzzi Laser L250-7C would be the replacement for your Jacuzzi Laser250-6/A sand filter.
 Reply


?     Asked on 6/9/2016by Deb

Is this be the replacement valve for the Jacuzzi Laser sand filter 160L?
 Reply

A  Answered on 6/14/2016 by InyoPools Product Specialist Lennox H.

Hi Deb, This valve is compatible with the Jacuzzi Laser - Bolt On style filters.
 Reply


?     Asked on 6/12/2016by Robert

Will this valve fit on the MFM model?
 Reply

A  Answered on 6/12/2016 by InyoPools Product Specialist Matt S.

This valve will only fit on the MFM15. If your MFM filter is not the 15 then you will need to pick the correct valves from the following parts list: Jacuzzi MFM Sand Filters (MFM17,20,24) Parts
 Reply


?     Asked on 7/30/2017by tina

i need the top mount for the alt 140 jacuzzi
 Reply

A  Answered on 8/11/2017 by InyoPools Product Specialist Lennox H.

Hi, Tina. Unfortunately, I was not able to locate a Jacuzzi ALT 140 filter. However, there is a Jacuzzi ATL160C model filter that requires 140 lbs of sand which use the DVK-7C Valve, Clamp Type - 39263020K. If you can provide the valve model or confirm the valve model we can locate the correct replacement valve. 
 Reply


?     Asked on 4/16/2018by Jeff

Does this filter have a sight glass.
 Reply

A  Answered on 4/16/2018 by InyoPools Product Specialist Hector F.

This valve model does not have a sight glass. 
 Reply


?     Asked on 4/16/2019by Jose

Hi. Is this be the replacement valve for the Jacuzzi Laser sand filter 160L? includes the gasket?
 Reply

A  Answered on 4/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Jose. This DVK4 valve will operate a Jacuzzi Laser sand filter model 160L. The gasket and hardware are included. 
 Reply


?     Asked on 5/20/2019by Alex

Hi, Will it fit on a Jacuzzi laser 192 sand filter?
 Reply

A  Answered on 5/20/2019 by InyoPools Product Specialist Patrick P.

Hi Alex, I believe your Jacuzzi 192 Sand Filter uses a clamp to secure the valve to the tank like shown in this Parts Diagram of the Jacuzzi Laser Clamp Style Filter if so then you will require this Jacuzzi Clamp Style Valve and not valve listed on this page.
 Reply

  • Commented on 5/20/2019 by Product Owner

    Hi, I would like the one showed on the attached picture. What replacement part would fit?

     Reply

    • Commented on 5/20/2019 by InyoPools Product Specialist Patrick P.

      Hi Alex, Thanks for the photo that helps out a lot. You will require this Jacuzzi DVK6 Valve please note the threads on the top port are a little different than yours, take a look at all the photos on the product.
       Reply


?     Asked on 7/1/2019by George

My sand filter model is A140-7LRC-5-S1 sand filter by Jacuzzi. Is this the proper head?
 Reply

A  Answered on 9/23/2019 by Industry Professional

This is the correct valve Jacuzzi Inc. DVK4 1-1/2" Multiport Valve - 39258207R
 Reply


?     Asked on 5/10/2021by Pauline Bergeron

Is it the right replacement part for my antique jacuzzi valve?

 Reply

A  Answered on 5/11/2021 by InyoPools Product Specialist Patrick P.

Hi Pauline, I believe this is the correct replacement but we do not have 100% confirmation. You can always order and if it does not fit then you can return and you would just be responsible for the return shipping.
 Reply


?     Asked on 3/17/2022by Brian McBroom

Would this valve fit a jacuzzi laser sand filter 190L
 Reply

A  Answered on 3/17/2022 by InyoPools Product Specialist Rich N.

Hi Brian, it might fit your Jacuzzi Laser Sand Filter but we would need more details to be certain.  The available valve options are on this webpage as items 1A, 1B, and 1C.  Feel free to send pictures of your valve and any labels on it to us at upload@inyopools.com and we would be happy to be sure you get the correct valve. 
 Reply