?     Asked on 3/1/2015by Scott

I presume that this product is for the full assembly? This includes the valve body, correct? Basically, everything shown in the picture is included? Scott
 Reply

A  Answered on 3/2/2015 by InyoPools Product Specialist Robert M.

Hello Scott - This is the complete valve. You would receive everything in the picture.
 Reply


?     Asked on 3/18/2015by Inyo Visitor

Will sm2-pp2 interchange with sm-20-2 on pool valve
 Reply

A  Answered on 3/18/2015 by InyoPools Product Specialist Robert M.

Hello Billy - The SM2-PP2 valve will work on Pentair/Pac-Fab D.E. filters.
 Reply


?     Asked on 5/3/2015by Ed

Will this be a good fit for a replacement for the Hayward so 715 with. Triton 140 DE filter?
 Reply

A  Answered on 5/5/2015 by InyoPools Product Specialist Patrick P.

Hi Ed, Back in the day Purex / Pentair used Hayward valves on there Purex Triton filters however some while back Pentair started making there on valves. With this being said there are two valves which can be used on your filter the Hayward SP715ALL Valve or the Pentair 261055 Valve. The 261055 valve is a lot easier. There is a Slight difference in this and that old SP715 valve which has the pump and return ports one above the other. The 261055 will have them slightly staggered. The advantage of the 261055 Valve is that you won’t have to redo the plumbing coming from valve to filter. The SP715ALL Valve will have to be re-plumbed with new bulkhead nuts and pipe and the plumbing will have to be quite exact or the bulkhead nuts on the valve won’t match the spacing on the filter.
 Reply


?     Asked on 5/27/2015by Joe

My valve is the Praher model # SM20-1, serial # 1924442. Can you please tell me which of the parts fit this valve? The valve positions are facing the sky and the filter feed is to a DE filter. I am losing pool water and I think it is escaping through the backwash or waste water pipes. Thank you,
 Reply

A  Answered on 5/27/2015 by InyoPools Product Specialist Patrick P.

Hi Joe, for the issue with your SM20-1 valve I would suggest replacing the your SM20-1 Handle Assembly here.
 Reply


?     Asked on 5/29/2015by Inyo Visitor

Is the sm2-pp2 praher valve the correct replacement for my original #sm2-02 praher valve, used on a Jandy DEL 48 d.e. filter?
 Reply

A  Answered on 5/29/2015 by InyoPools Product Specialist Lennox H.

The Valve, Sm W/plumbing 2" P.f. D.e. (sm2-pp2) will not work on your Jandy DEL 48  D.E. Filter. Since you're replacing the complete valve you can replace your valve with the Jandy 2" Standard Multiport Valve For DEL48 & DEL60 or the MPV, 2", Piping Var. 2 (Fpt ) (SM-20-2).
 Reply


?     Asked on 9/15/2015by Jimmy

How do I know if the 1 1/2" or 2" is needed? Is it by the size of the bulkhead nut?
 Reply

A  Answered on 9/15/2015 by InyoPools Product Specialist Andy O.

Jimmy, What the valve is referencing being 2" or 1.5" would be your plumbing. So you would just measure the diameter of your current plumbing.
 Reply


?     Asked on 3/4/2016by Craig

Is this the correct valve for a FNSP-48 DE filter? On the side of the filter it has a sticker that says Praher SM2-PP2 D.E. Filter
 Reply

A  Answered on 3/4/2016 by InyoPools Product Specialist Lennox H.

Hi Craig, This valve will work with the FNSP-48 DE filter.
 Reply


?     Asked on 3/8/2016by Dewayne

What is the distance between center on the side mount ports of this valve? Is it just 7.5" or 8"? ~ Thanks
 Reply

A  Answered on 3/9/2016 by InyoPools Product Specialist Lennox H.

Hi Dewayne, The ports are 7.5" from center to center.
 Reply


?     Asked on 3/8/2016by Dewayne

Is this Valve compatible with the American Products Titan RPM D.E. Parts? ~. Thanks
 Reply

A  Answered on 3/10/2016 by InyoPools Product Specialist Lennox H.

Hi Dewayne,If you can provide us with the model valve you currently have we can confirm if this valve would work with the American Products Titan RPM D.E. filter.
 Reply


?     Asked on 3/19/2016by neil

i have pac fab sp715. what is replacement filter valve
 Reply

A  Answered on 3/21/2016 by InyoPools Product Specialist Lennox H.

Hi Neil, The SP0715ALL is the correct replacement valve.
 Reply


?     Asked on 5/16/2016by Marlon

We hava a Purex Triton SM10-2 D.E Multiport valve that is cracked... Is this the correct replacement.
 Reply

A  Answered on 5/18/2016 by InyoPools Product Specialist Lennox H.

Hi Marlon, The 261177 valve is the correct replacement  for the SM10-2 valve.
 Reply


?     Asked on 9/5/2016by randy

Have a old valve the only number is SM-20 , what should I replace it with has 7 outlets I use 5
 Reply

A  Answered on 9/28/2016 by InyoPools Product Specialist Alan M.

The correct replacement valve will be the Valve, Sm W/plumbing 2" P.f. D.e. (sm2-pp2) for the SM-20.
 Reply


?     Asked on 9/13/2016by Eileen

Do you have a part number for the 2" union nut? I keep ordering them and receiving the incorrect part.
 Reply

A  Answered on 9/14/2016 by InyoPools Product Specialist Stacey M.

Hello Eileen, What are you needing them for a pump or hook up for sand filter? If you could take pictures and send them to us at upload@inyopools.com we can better assist you with finding the right union nut for you.
 Reply


?     Asked on 9/19/2016by chris

How do I get a replacement gasket for the NSF (Praher) SM2-PP2?
 Reply

A  Answered on 9/19/2016 by InyoPools Product Specialist Stacey M.

Hello Chris, If you just need Gasket, Diverter 2in 5-spoke (e-12-s 2") (271148). Anything else you would need for this particular valve is under Pentair - Praher 2" TM22 & SM20 Parts
 Reply


?     Asked on 3/2/2017by Karen

Is this threaded
 Reply

A  Answered on 3/2/2017 by InyoPools Product Specialist Andy O.

Hello Karen, Yes, the port openings on the Valve, Sm W/plumbing 2" P.f. D.e. (sm2-pp2) 4715A are threaded.
 Reply


?     Asked on 3/18/2017by Andrei

I have a Nautilus NS48 DE filter with the push pull valve which I would like to replace with a multi port valve. I know the 2 inch size refers to the pump inlet and outlet sizes. I am interested in the filter inlet and outlet, what is the threaded pipe size? Also what is the distance between the distance between the filter inlet/outlet ports?
 Reply

A  Answered on 3/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Andrei. The filter port size is 2 inches and the ports centerline is 7-1/2 inches.
 Reply


?     Asked on 4/17/2017by Rick Preston

Need to replace my pool valve SM20-1 (DE filter). What is the correct replacement valve to order ? Thanks, Rick
 Reply

A  Answered on 4/17/2017 by InyoPools Product Specialist Stacey M.

Hello Rick, from what the SM20 matches on DE filters is 2" Multiport Valve Threaded for D.E - 261152. Please check specs to see if this is correct for your filter.
 Reply


?     Asked on 6/10/2017by Doug

Looking to replace my Praher D.E.FIlter SM20-2 multi-port valve. The serial number is 2918023. Where is the model/part number located on the valve?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Hector F.

Here is the parts diagram with the listed versions of the SM20 series multiport valves. Usually the model number is on the label on the top of the valve itself. If you cannot locate the valve model then you can send us a few images to upload@inyopools.com to assist in identifying it.
 Reply


?     Asked on 7/25/2017by Bert

Have a 7-8 year old SM2-PP2 valve for DE filter. Have significant leakage coming from the Backwash/Waste line out of the filter when the pump is engaged. Any suspect part which may have to be replaced? Thanks
 Reply

A  Answered on 7/28/2017 by InyoPools Product Specialist Lennox H.

Hi, Bert. The Diverter Gasket - 271148 will need to be replaced in order to stop the leak. 
 Reply


?     Asked on 1/30/2018by Kenneth

I have a Pentair Model # SM2-PP29,need to replace.What model # replaces it.
 Reply

A  Answered on 1/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Kenneth. You can use this SM2-PP2 valve as a replacement. 
 Reply


?     Asked on 4/21/2018by Billy

Is this product the correct replacement for the SM 20 - 2?
 Reply

A  Answered on 4/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Billy. This SM2-PP2 is a version of the SM20-2 Series valve. The SM2-PP2 valve is compatible with the following filter Models.
 Reply


?     Asked on 6/13/2018by Inyo Visitor

I need just the top valve key assembly model SM2-PP2 (not the whole thing with the pipes)— is that available?
 Reply

A  Answered on 6/13/2018 by InyoPools Product Specialist Charlie R.

Yes, you can view all of the replacement parts we have available for the SM20 valve HERE
 Reply


?     Asked on 6/22/2018by TOM

Is this product the correct replacement for the SM 20 - 2? YES OR NO, BEFORE I ORDER please -asap
 Reply

A  Answered on 6/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Tom. This SM2-PP2 Valve is a version of the SM20-2 valve that has pre-plumbed connections that are compatible with these selected Pentair DE Filters
 Reply


?     Asked on 6/21/2019by Inyo Visitor

I Have a SM20-1 valve. Does this one replace it?
 Reply

A  Answered on 6/21/2019 by InyoPools Product Specialist Joe S.

Yes, 4715A SM20-1 would be the replacement for that unit
 Reply


?     Asked on 7/8/2019by philip

need new gasket and top valve assembly including the spring for this valve. can you let me know the model numbers so i can order thanks

 Reply

A  Answered on 7/8/2019 by InyoPools Product Specialist Joe S.

Good afternoon, here is the parts listing for the Jandy Side Mount Valve-DE.
 Reply


?     Asked on 7/25/2019by Diane Lewis

I just received this today. I have three open ports. Nothing on the device. Where do they go?
 Reply

A  Answered on 7/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Diane. The ports are labeled, the PUMP port is the Top Left, the RETURN port is the Bottom Right, and the WASTE port is the parallel port.  
 Reply


?     Asked on 4/6/2020by brian shahan

Will this replace a SM20-AO 2 inch multiport? If not, what are the differences between the two?
 Reply

A  Answered on 4/6/2020 by InyoPools Product Specialist Patrick P.

Hi Brian, we do carry the SM20-AO valve and that is what we suggest you replace your current SM20-AO valve with. Click here to view or purchase the SM20-AO valve.
 Reply

  • Commented on 4/6/2020 by Product Owner

    Thanks, is the plumbing (i.e. the pipes into the filter) a separate part that needs to be purchased?
     Reply

    • Commented on 4/6/2020 by InyoPools Product Specialist Patrick P.

      Hi Brian, would it be possible to post a few photos of the valve as well as wide shot showing the complete filter? Simply click the reply link to post these photos. This would help me determine if anything else is needed.
       Reply

      • Commented on 4/7/2020 by Product Owner

        See attached photos.

         Reply

        • Commented on 4/7/2020 by InyoPools Product Specialist Patrick P.

          Hi Brian, Thanks for those photos the -AO part # indicates with no plumbing but after seeing your part #'s you do need the plumbing which attaches to your filter and this 4715A Valve W/ Plumbing for FNS Plus would be the valve you require.
           Reply


?     Asked on 4/16/2020by john senecal

Praher SM2-PP2 Or Pentair 261152 are both the same. On top of valve it has NSF SM-20-2,SM2-PP2 neither one has a check or mark on it.

 Reply

A  Answered on 4/16/2020 by InyoPools Product Specialist Patrick P.

This SM2-PP2 is a version of the SM20-2 Series valve. The SM2-PP2 valve is compatible with the following filter Models. If your valve actually connects to your filter and is not just plumbed in-line with the plumbing then this is the correct valve. Could you supply a wider shot photo showing the valve and the complete filter? To supply that photo(s) simply click the reply link below to upload your photo.
 Reply


A  Answered on 4/16/2020 by Product Owner

Here are the information. Thanks an Be Safe.

 Reply

  • Commented on 4/16/2020 by InyoPools Product Specialist Patrick P.

    Thanks John for the photos! You will need this sm2-pp2 valve listed on this page. Thanks for the well wishes, you be safe too.
     Reply


?     Asked on 5/29/2020by Daryl Watkins

I am looking for a replacement multi-port backwash valve for a Jandy DEV60 Filter. The Praher model number of the existing backwash valve is SM20-2. Also, my setup has unions. Is the Pentair 261152 the appropriate replacement?

 Reply

A  Answered on 10/22/2020 by InyoPools Product Specialist Hector F.

Hi Darryl, so the 261152 is designed for another manufacturer however the model multiport valve listed specifically for the Jandy DEV60 is part number 4581-020
 Reply


?     Asked on 10/25/2020by James Q

I have a SM2-PP2 valve for DE filter and the valve is leaking on the small plastic screw on the front. I replaced the plastic screw but it is still leaking. I tried some putty around it but still leaking. What would you recommend? thanks James

 Reply

A  Answered on 11/2/2020 by InyoPools Product Specialist Hector F.

Hi James, you can try to remove the screw, and place a back mount pressure gauge in its place using teflon tape as well to help seal it. 
 Reply


?     Asked on 10/15/2021by Shawn Hood

Will this fit a pentair NSP 48

 Reply

A  Answered on 10/15/2021 by InyoPools Product Specialist Megan C.

Yes, the Valve, Sm W/plumbing 2" P.f. D.e. (sm2-pp2) 27507-200-000 can be installed with your filter. 
 Reply


?     Asked on 10/2/2023by Christina

I have a leak from a crack on my Pentair multiport valve. It is from 2013, would this be a suitable replacement? Has valve model sm-20-2, valve assembly model sm2-pp2, 27-3207 rev f and 10-284910 numbers listed on the part. Attached are photos. Thank you!

 Reply

A  Answered on 10/2/2023 by InyoPools Product Specialist Craig C.

Hello Christina.  The CMP Multiport Valve, 2" Plumbing, Fits Pentair/PacFab - SM2-PP2 is a compatible replacement multiport valve for the Pemtair multiport valve SM2-PP2 as shown in the photo attachments.  
 Reply