I am replacing a Hayward SP0704 valve with the SP0714T, will all the ports be in the same location?
Reply
The ports on the SP0714T are positioned differently than the ones on the SP0704 valve so will have to move the locations of the hoses.
Reply
Does this spo714t fit the model s-244t sand filter and replace the sp-711-20 flow valve
thank you
Reply
Gary, If you current valve is on top of your filter and has 1-1/2" pipe coming into it then this would be the correct valve for the Hayward S-244T sand filter.
Reply
Does this replace the SWIM PRO SP704 valve? Does it come with the o ring and pressure gauge?
Reply
Hello, Yes, the SP0714T replaces the SP704T valve. The SP0714T comes with the pressure gauge and tank o-ring.
Reply
Is this easy to replace and what is your return policy?
Reply
Gale, The valve is easy to replace. You simply have to remove the plumbing and loosen the clamp. Please be sure to release the pressure in the tank befor removing the valve. You can return the in new/unused condition within 30 days. Please call us if you need to return the valve.
Reply
Can only the interior of this be obtained and how much will it cost
Reply
Yes we do carry the Internal Assembly of the Hayward SP0714T Valve here.
Reply
Can the clamp that holds the valve to the tank be purchased by its self or do you have to purchased the entire unit? The one on the tank broke where it screwed together.
Reply
Hi Dick, The Clamp can be purchased separately. If you can provide us with the manufacture and model of the tank that the valve connects to I can locate the correct clamp assembly.
Reply
handel broke at top of filter can i buy.
Reply
Hi, The Handle (SPX0710XF) is the replacement handle for this valve.
Reply
What model replaces the model SP 711 Hayward Vari-Flo valve or can I still get it?
Reply
What is your valve's full model number? The SP711 should be followed by a "13" or a few letters. Or you can provide a the filter's model number.
Reply
I have a Hayward Swim Pro Filter Model number SP-711SW what new model would replace it. I looked at SP071T would this model works?
Reply
Hi Bob, Yes the Hayward SP071T Valve would be the proper replacement for your SP-711SW valve.
Reply
missing the top lever diagram on my filter system. can you email me the diagram. Hayword E-100L serial # 21120904001164007
Reply
Here is a link to the Hayward E-Series Top Mount Sand E-100 Parts diagram. I believe you are looking for the replacement Top Mount Valve, SP0714T.
Reply
Hi, the body of my SP711 13TE is broken, what is the replacement and are the connections identical?
Reply
Hi, The SP0714T valve is the replacement for the SP711 Series valve and the connections will be the same.
Reply
I need a replacement for a valve gasket SP704-C, can you assist?
Reply
Hi, Dominique. The Valve Key Gasket - SPX0704D will fit your model valve. You can also view all the available parts via the Hayward Multiport 4 Position 1 1/2" Vari-Flo Model SP704 Parts page.
Reply
I have a broken hayward SP714 for 2" pipe sand filter. Which topmount will replace this? And, how do you change this?
Reply
Hi, Scott. The Hayward SP0714T filter only has 1-1/2" ports. If the filter you have has 2" ports you will need p/n SP071621. Instructions can be found in our How To Replace the O-Ring on a Pool Sand Filter.
Reply
I have a problem what is the clear tube between the pump and the valve assembly called.
Reply
Hi, Lawrence. It is called the Clear Tube Union Elbow - SPX1485B6 which is used on some Hayward side mount sand filters.
Reply
The model number is not on the valve where it should be. It might have been erased by the sun. The valve body has "SP714A" I need a replacement. Is the SPX714T the right one.
Reply
Hi Chuck, Yes this SP0714T valve is the correct replacement for your SP714A valve.
Reply
Water is coming out the top of our filter, especially after we backwash!we replaced the spider ring
Reply
Hi. You may have to replace the Tank O-ring if water is leaking from between the tank and the filter valve. Water leaking from the valve after changing the diverter gasket would lead to a bad cover o-ring or valve stem o-ring.
Reply
Water leaks a little bit but always out the back where you backwash in just about every position. Do you know why?
Reply
Jason, this is an indication that you need to replace this Diverter W/ Spider Gasket
Reply
Looking to replace my hayward vari flo control assembly body. model sp-711-13. I see the replacement is SP 0714 although the ports for pump and return are not aligned the same as on my sp 711-13. My lines are pvc pipe and sp 0714 ports will align with my existing lines. Is there a solution?
Reply
G, Unfortunately, you will have to re plumb. The newer valve ports are off centered to allow for easier installation.
Reply
We have a Hayward S-180T series. It is leaking water out the backwash hose and putting sand back into the pool. Do I need a new 6 position multiport valve or what is causing this?
Reply
Hi, John. You can either replace the Top Valve Assy - SPX0714BA and Cover O-ring - SPX0714L or the entire valve in order to resolve your issue.
Reply
I have an Hayward diverters sp714A. I can not find a gasket for replacement.
Reply
Hi, Dave. The SP0714T valve replacement gasket is not sold separately, you'll have to purchase the Diffuser w/ Gasket - SPX0714CA.
Reply
The valve still is working but is hard to move. Consequence was that the handle broke. Do you have that only?
Reply
Typically in your case, it is the spider gasket that needs to be replaced and of course, you would need to replace the handle to repair this issue. You can see these parts listed as keys 1 and 9 listed on the parts diagram here. You may also want to consider replacing that entire top valve assembly being key 4.
Reply
We have a SP-711 TXC Hayward multiport Vari-Flow. We would like to replace it. Am I correct in thinking that I can replace it with SP0714T?
Reply
I have a Hayward 166T sand filter and when I backwashed for the first time the water kept draining and drained down my pool. Would I need to replace the spider gasket or the entire multiport. Also my model number has worn off. What do you recommend
Reply
Byron, This valve will fit the S166T. It sounds like you may need to inspect the spring. The spring can be difficult to replace so you may be better off replacing the entire valve.
Reply
I have an older model sand filter #S190TSCP Dream line. I need to replace the top mount valve assembly. Which one would I need to get? I cannot find one that lists my model#.
Reply
I need a Vari-Flo Control Valve part#SP704 For modelS-144T. Will this replacement work? It also looks like there's another portal added.
Reply
does this replace sp0714g11m
Reply
Hi Deb, Yes this valve does replace the sp0714g11m we also carry the PureLine PL0714 Valve which is also a direct replacement for the sp0714g11m and the price on that valve is only $59 and the quality is just the same as this valve.
Reply
Is this the whole part and not just the valve
Reply
Deb, This is just the valve. Which other part are you needing? Feel free to post a photo if you like, simply click on the reply link to upload a photo.
Reply
Does this replace the SP714 T1 model?
Yes, this is the replacement for the Hayward SP714 T1 model. We also carry the PureLine PL0714 After Market Valve for $59 which also is a direct replacement for the SP0714T
Reply
I have a Hayward SP-711 Vari-Flo Valve. Will this replace it correctly?
Reply
Yes this does replace the SP-711 Vari-Flo Valve. We also carry the PL0714 Generic Valve at $59 which will also replace the SP711 Valve
Reply
I have a hayward pro series high rate sand filter model s166t, the valve is a sp714 will this replace the one I have?
Reply
Hi Brian, Yes this is the proper replacement valve for the Hayward pro series high rate sand filter model s166t. The valve listed on this page is the original valve made by Hayward. We also carry the valve made by PureLine which is also a direct drop-in replacement for your valve. The PureLine valve is $59 and can be viewed or purchased through this link PureLine Replacement Valve for Hayward SP0714T
Reply
is this the part I need to replace I changed the sand but when I vacuum all the dirt goes back into the pool ?
Reply
Hi. The valve could be the cause if the diverter gasket is bad. You can tell if the diverter gasket is bad if water is leaking out of the backwash port while in filtration mode. If that's not happening the valve is not the issue and it could be another issue.
Reply
is this the bigger version for 2 inch plumbing
Reply
Hi William, the 2-inch version of this Hayward Vari-Flo XL multiport valve is part number 27518-204-000 for the generic version and SP071621 for the original Hayward OEM version.
Reply
I have a Hayward SP0714TX valve on a S190TSCP sand filter. What valve would replace it or is a kit with the spring available?
Reply
This SP0714T valve is the correct replacement valve for the SP0714TX valve on an S190TSCP sand filter. We do have this valve in stock ready to ship.
Reply
is there a repair kit for the hayward sp0714t top mount valve flange?
Reply
i need a diagram of the inside of filter sp714
Reply
Here is the parts diagram for the Hayward Vari Flo XL multiport valve.
Reply
I have this port on a 16" sand filter. I have attached a picture of the Hayward Vari-flow valve. I need to replace the lateral assembly and stand pipe. What model number do I need?
There should be a label on the side of your filter, could you supply us with the information from that label? Simply click the reply link below to provide the requested information so we may make the appropriate suggestion.
Reply
I have a model number S190TSCP Dream Line Sand Filter and looking for replacement of Top Value Mount that sits on top of the body of the cylinder container. See the photo attached. The handle that changes the valve placement snapped off.
Hi Richard, this is the correct top valve assembly for the model Hayward S190TSCP sand filter.
Reply
can the pressure gauge be bought separately? AT what price?
Reply
Hello Thane, Yes you can purchase the gauge separately. You can find the bottom mount pressure gauge here. The price right now is $16.99
Reply
who makes the spo714t replacement part
Reply
This valve is a replacement for the Hayward SP0714T Valve and this valve is manufactured by Custom Molded Products as a suitable after-market replacement for the Hayward original valve.
Reply
would this hayward top mount fit my E series high rate sand filter?
Reply
This top mount valve is used on the Hayward E-Series Top Mount Sand Filter. This includes model number E100, E200, and E250
Reply
What is your return policy if I get the incorrect multiport
Reply
Here is a link to our return policy.
Reply