Part # SQ1102
Warranty 1 Year
Dimensions 14" L x 6.5" W x 6.5" D
Voltage 115/230, Max Amps 115 Volts = 19.2 Max Amps 230 Volts = 9.6 , Single Speed, Square Flange, RPM = 3450, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Option:
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Reply
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Reply
I now have a square flg.motor. will any square flg. motor fit my pump
Reply
Hi Tony, To determine which motor you would require we would need to know the model of the pump itself, this should be on the side of the pump near the basket. We would need the manufacture name and model # of the pump. Examples of the Manufacture would be Hayward, Pentair, Purex, Sta Rite, Jacuzzi, etc... Examples of model names would be Super Pump, Super II, Whisperfo, Magnum, Dura Glas etc.. Please provide this information along with any of the following information Horse Power, Volts, SF, RPM & Amps and we will be able to determine which motor you would need.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
The label of the motor I was replacing was worn off, but Inyo was able to help me identify the correct replacement based on other factors. Best customer service via chat I've ever received. Product was shipped securely and quickly and performed exactly as expected.
Was this review helpful to you?
(4 out of 5 stars) Swimming Pool Pump Motor
Reviewed By: Jerry Baby from Benton, MS ()
Inyopools has a really reasonable price on this swimming pump motor!
Was this review helpful to you?
1 0
(5 out of 5 stars) Nice motor
Reviewed By: William M. from Fairfax, VA ()
Pros: Very Quiet
Cons: none
Quiet, powerful, and an easy install. With the gasketing kit. the whole process took less than one hour.
Was this review helpful to you?
(5 out of 5 stars) Excellent Motor and fast shipping
Reviewed By: Scott M. from Baton Rouge, La. ()
Cons: none
Motor is installed and working properly and shipping time was excellent. Would purchase from Inya again with no hesitation.
Was this review helpful to you?
(5 out of 5 stars) good replacement motor
Reviewed By: Dale W. from Avon, IN ()
Cons: examine centrifical switch carefully
Motor was a perfect match for the original. Most dealers want to sell an up-rated motor, but this one is a full rated 1 hp motor with 1.65 service factor. Centrifugal switch was dislodged during shipment causing capicator burnout, but was easily fixed after diagnosing.
Was this review helpful to you?
(5 out of 5 stars) Simple install
Reviewed By: Dwane K. from West Bend, WI ()
What a great improvement from my old motor. Drastically reduced the noise, too. This motor is quiet while running and easy to install. Had my 10-year-old help out.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Greg H. from Joliet, IL ()
It could come with more instructions on how to remove the impellor without breaking the pump case.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Ted A. from Californa ()
Pros: Low price & fast shipping
Cons: none
Shipping was quick. Thank you
Was this review helpful to you?
(5 out of 5 stars) Heavy duty - perfect fit
Reviewed By: John H. ()
Runs like a real trooper and was a perfect fit. One tip: I had to remove the starter capacitor to fit a 7/16 open end wrench to the shaft for impeller installation/removal. If you do the same, be sure all the capacitor's wiring is reinstalled protected under the capacitor. Otherwise it will be chafed by the rotating shaft.
Was this review helpful to you?
(5 out of 5 stars) Super pump motor
Reviewed By: J B. from Georgia ()
Pros: Quiet, and a good price
Cons: Wished the other one hadn't gone bad in 2 years
Replaced the motor for my pool pump. This is the second from Inyo. Gave the numbers from my previous order, it was in stock and shipped out quickly! Telephone help was great and they made sure I had everything correct.
Was this review helpful to you?
3 0
(5 out of 5 stars) Good service
Reviewed By: TedB from Mt Pleasant ,SC ()
Pros: Exact replacement for original
Cons: None
Replacement for 14 year old original. Shipped and delivered as promised.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Lance from San Antonio, TX ()
I installed this new motor with no problems. It seems to run more quietly than the replaced one.
Was this review helpful to you?
2 1
(4 out of 5 stars) Do-It-Yourself
Reviewed By: Do-It-Yourselfer from San Diego, CA ()
Pros: great replacement!
Cons: difficult to remove impeller
I very much like this product. Easy to install with exception of removing the impeller. Overall, great replacement motor!
Was this review helpful to you?
0 1
(4 out of 5 stars) Great replacement!
Reviewed By: Do-It-Yourselfer from San Diego, CA ()
Pros: 230v/115v conversion clearly identified; made re-wiring very easy.
Cons: access to the bolt in rear of motor to remove impeller exteremely difficult to get to
Great replacement motor for a like product. Other than the difficulty of trying to remove the impeller by loosening the bolt in the rear compartment, this motor was easy to install for a novice like me!
Was this review helpful to you?
203 12
(5 out of 5 stars) Excellent Pump Moter Replacement
Reviewed By: PoJo from Clarence, NY ()
Pros: Awesome fit - excellent replacement
Cons: none
Tip to get the impeller off the old pump moter: use a 7/16" open ended wrench - it slides in near the capacitor on the electrical side... rotate the impeller until the wrench slides into place at the end of the shaft and then one person holds the motor and the wrench while a 2nd person loosens the impeller off with bare hands by turning the impeller counter clock-wise.
Was this review helpful to you?
(5 out of 5 stars) A.O. Smith 1 H.P. Pool Filter Motor
Reviewed By: Kathy from Flemington, NJ ()
This was a replacement motor for our pool filter. Everything fit perfectly and is working great.
Was this review helpful to you?