$7.71

Qty:

Details

Top

Part # 5110-12A

Manufacturer Code G-345

Dimensions 7-1/2" X 1/8" X 1/16"

Alternate Part #'s 1012067, 16326, 64351, G-345, G345, HAY1012067, O-1217, RAI-451-4020, SP3000T, SPG-601-1030, SPX3000T, 90-423-2018, AEQG345, APCG3273, HAY-101-2067, PL2745

Product Description

Pump housing gasket for Hayward Super II and Super Spa, and Leslie's Hydromax II.

Frequently Bought with Housing Gasket

Magic Lube Gasket Lubricant

Top

?     Asked on 9/2/2014by Guest

Will replacing part SPX3000T stop the leak around the housing and seal plate?
 Reply

A  Answered on 9/2/2014 by InyoPools Product Specialist Patrick P.

Replacing SPX3000T should stop the leak between the housing and seal plate. If not, you may have a cracked seal plate or housing.
 Reply


?     Asked on 4/1/2020by Capt. Gaelyn

I need a new housing gasket for my Haywood SP 3010 EE. Will this one fit?

 Reply

A  Answered on 4/2/2020 by InyoPools Product Specialist Lennox H.

Hi, Capt. Gaelyn. This Housing Gasket (SPX3000T) - G-345 is the correct replacement for your model pump. 
 Reply

  • Commented on 4/2/2020 by Product Owner

    thank you!
     Reply


A  Answered on 4/2/2020 by Product Owner

I found a new gasket in my supplies, changed it out but it is now obvious the motor is leaking at the bottom where it joins the housing. Could this be the shaft seal? if so, what is my replacement part?

 Reply

  • Commented on 4/3/2020 by InyoPools Product Specialist Lennox H.

    Capt. Gaelyn, That is correct, the Shaft Seal has failed and will need to be replaced. Your options are P/N SPX1600Z2 (OEM), PS-3868 (Heavy Duty), PS-201 (Standard Generic).  
     Reply


?     Asked on 4/20/2020by Felix

This item fit for my sp33152etb?

 Reply

A  Answered on 4/21/2020 by InyoPools Product Specialist Patrick P.

Yes, this Housing Gasket does fit the sp33152etb pump.
 Reply


?     Asked on 11/15/2020by Ron

I removed difuser o ring. Re assembled and water leaking under side of housing. Noticed a flat rubber seal approx. 10" in diameter. Is the seal the problem or did I crank housing when I re assembled. Cheapest way is buy another seal.
 Reply

A  Answered on 11/16/2020 by InyoPools Product Specialist Hector F.

Hi Ron, sometimes you may just need to clean that seal, and the general area, then lubricate it for it to seal again. If it doesn't seal then you may need to replace it. 
 Reply


Top

Review Summary

 (Average 4.79  out of 5 stars)
14 Rating
5 star:
 
(11)
4 star:
 
(3)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews