Part # 5110-12A
Manufacturer Code G-345
Dimensions 7-1/2" X 1/8" X 1/16"
Pump housing gasket for Hayward Super II and Super Spa, and Leslie's Hydromax II.
Frequently Bought with Housing Gasket
Will replacing part SPX3000T stop the leak around the housing and seal plate?
Reply
Replacing SPX3000T should stop the leak between the housing and seal plate. If not, you may have a cracked seal plate or housing.
Reply
I need a new housing gasket for my Haywood SP 3010 EE. Will this one fit?
-G-345.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-G-345.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward Pump Housing Gasket for Super II, RS Series, HydroMax II Pump Models - SPX3000T - G-345")
Hi, Capt. Gaelyn. This Housing Gasket (SPX3000T) - G-345 is the correct replacement for your model pump.
Reply
thank you!
Reply
I found a new gasket in my supplies, changed it out but it is now obvious the motor is leaking at the bottom where it joins the housing. Could this be the shaft seal? if so, what is my replacement part?
-G-345-6c2d0b46-4de8-4b7b-8938-053eedf53d32.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-G-345-6c2d0b46-4de8-4b7b-8938-053eedf53d32.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward Pump Housing Gasket for Super II, RS Series, HydroMax II Pump Models - SPX3000T - G-345")
I removed difuser o ring. Re assembled and water leaking under side of housing. Noticed a flat rubber seal approx. 10" in diameter. Is the seal the problem or did I crank housing when I re assembled. Cheapest way is buy another seal.
Reply
Hi Ron, sometimes you may just need to clean that seal, and the general area, then lubricate it for it to seal again. If it doesn't seal then you may need to replace it.
Reply
-G-345-83d56f25-fc25-4076-8838-f66c9c2405dc.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-G-345-83d56f25-fc25-4076-8838-f66c9c2405dc.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward Pump Housing Gasket for Super II, RS Series, HydroMax II Pump Models - SPX3000T - G-345")
The Most Helpful Review
1 0
(5 out of 5 stars) Pool pump replacement
Reviewed By: Inyo Customer ()
Works good no leaks
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Had no leak issues after replacement. Easy to install
Was this review helpful to you?
(5 out of 5 stars) Hayward Super 2 Pump Parts
Reviewed By: Inyo Customer ()
Perfect replacement for my Super 2 Pump
Was this review helpful to you?
(4 out of 5 stars) Pump housing gasket replacement
Reviewed By: Inyo Customer ()
not bad, but hard to keep in position when re-assembling the pump
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works Great...
Was this review helpful to you?
(5 out of 5 stars) No leaks
Reviewed By: Inyo Customer ()
Works great. Pump shaft seal was leaking replaced that and also replaced housing gasket easy to install took 30 minutes and back in business
Was this review helpful to you?
(5 out of 5 stars) Fixed My Leak
Reviewed By: Inyo Customer ()
Fixed my leak
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This was a must when splitting the pump housing, and the fit was spot on!
Was this review helpful to you?