$80.73

Qty:

Details

Top

Part # 4682-06A

Manufacturer Code 24850-0009

Dimensions 26" L x 26" W x 5/8" D

Alternate Part #'s 24850-0009, 248500009, O-486, STA0512692, PEN24850-0009, PEN248500009, STA-051-2692

Product Description

O-RING S8S70(24850-0009)

System 3 Tank O-Ring Fits:

  • S8D110
  • S8M150
  • S8S70
  • S8M500

Be sure upper tank half contacts Cord Ring surface evenly and seal area is clean and free from dirt. Do not lubricate Cord Ring; lubricants may cause the Ring to swell.

 

Top

?     Asked on 9/10/2016by Jim

I need a couple arts for my Sta-Rite cartridge filter. I have Model No. S8M600 I see listings for the S8M500 and even the S8M700 but nothing for the 600 any suggestions (cartridges and cord ring)
 Reply

A  Answered on 9/11/2016 by InyoPools Product Specialist Stacey M.

Hello Jim, depending on what you need look up by the manufacturer part located on page 10. http://www.pentairpool.com/pdfs/ModMedia-System3OM.pdf
 Reply


?     Asked on 8/8/2019by Tim

some sites list this part as 25" diameter but this one is listed at 26". Is your dimension accurate? Could be the reason the 25" one I bought is leaking.
 Reply

A  Answered on 10/18/2019 by InyoPools Product Specialist Michelle B.

Hello, What is the brand and the model of your filter?
 Reply


A  Answered on 8/10/2019 by Industry Professional

WHAT STA-RITE FILTER ARE YOU USING THIS REPLACEMENT "O" RING ON?
 Reply


A  Answered on 8/9/2019 by Industry Professional

We have had this question several times on this o-ring. What we have listed at 26" appears to be correct as we are not getting call backs or returns. There are several alternates that are close & there are several different mfg's that make aftermarket/generic replacements & our guess is that is what you recieved.
 Reply


?     Asked on 5/22/2020by Inyo Visitor

Hi, Is this an actual Pentair part or an after market part?
 Reply

A  Answered on 5/22/2020 by InyoPools Product Specialist Hector F.

This o ring will be an aftermarket/generic part. 
 Reply


?     Asked on 6/8/2022by Inyo Visitor

Is this the O-ring that fits between the upper and lower tank halves? I have an old S8M150 system that has a few pin hole leaks and need to replace the bottom half, just want to make sure this is the correct O-ring. Thanks
 Reply

A  Answered on 6/8/2022 by InyoPools Product Specialist Craig C.

Hello.  The Tank O-ring S8S70, S8D110, S8M150, S8M500 (24850-0009) is the correct tank body o-ring for the Sta-Rite System 3 Cartridge Filter model S8M150.  Attached please find the Sta-Rite System 3 Cartridge S8M150 exploded parts diagram for reference.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews