Will this product work as a replacement for a an american products multiport valve side mount DE m series 501602?
Reply
As long as you can re-use the old plumbing fittings this could be used. This has no plumbing fittings but could be used.
Reply
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
I ask this earlier about the Sp-715-a-6. Actually, I need it to be a valve body assembly for a for a muti- port. Thanx
Reply
If you are looking just for the body of the multi-port valve, that would be part number SPX0715ALLAA Please note that a new 2 Inch multi-port valve is only about $25 more complete.
Reply
Will this be a good fit for a replacement for the Hayward so 715 with. Triton 140 DE filter?
Reply
Hi Ed, Back in the day Purex / Pentair used Hayward valves on there Purex Triton filters however some while back Pentair started making there on valves. With this being said there are two valves which can be used on your filter the Hayward SP715ALL Valve or the Pentair 261055 Valve. The 261055 valve is a lot easier. There is a Slight difference in this and that old SP715 valve which has the pump and return ports one above the other. The 261055 will have them slightly staggered. The advantage of the 261055 Valve is that you won’t have to redo the plumbing coming from valve to filter. The SP715ALL Valve will have to be re-plumbed with new bulkhead nuts and pipe and the plumbing will have to be quite exact or the bulkhead nuts on the valve won’t match the spacing on the filter.
Reply
Is this a direct replacement for Model SP 71520T
Thanks
Reply
Hi Russell, This Hayward 2" Multiport Valve (SP0715ALL) can replace the SP71520T Valve which would require you to make your own connection from the filter tank to the valve.
Reply
Will this fit on an old Sta Rite model S8S70 System 3 Hi Rate Sand filter? The Existing Hayward multiport looks to be a SP-715-A-50.
Reply
Hi, This Hayward Multiport Valve can be used with the Sta-Rite S8S70 model filter.
Reply
I need to replace the PVC from the pump to the Valve 2" Multiport Hayward (sp0715all) control. It is leaking where it enters the valve. I don't have it apart yet but I want to pick the pipe fittings up on the way home. I know it uses 2" PVC but the threaded inlet is much larger than that. What size is that opening so I can pick up the right reducer to connect it to the 2" line?
Reply
You would need threaded 2 inch mip's for plumbing 2 inch pvc to these ports.
Reply
I have a pac fab SP-725-D.E.
Is this the correct replacement for the full multi port?
Reply
Hi Dan, I was not able to find any info on a Pac Fab SP-725-DE valve. This valve can be used with a Pac Fab filter, however if you can upload photos of your valve we can confirm if this valve will work.
Reply
I need a new label, the label # SP715XR50. How can i get this one?
Reply
Hi, Jim. We do not have that part available, you will have to replace the entire Key Cover & Handle Assembly - SPX0715BA (White) or SPX0715BA3 (Black)
Reply
Hi will this be a direct replacement for SP-715-A-4 ? Or can I used a newer model thanks. I have an American titan S.S. vertical grid DE filter. Model 584090
Reply
When connecting a multi port valve to a hayward filter why is the earth coming back in the pool by the return line
Reply
Hi, Doris. Our Getting DE Powder Back in Your Pool blog list the top causes for getting DE back into your pool.
Reply
need to replace entire valve assembly SP071620TNP
is this the correct one?
top is 715g11
tank is sx310aa1
Reply
Hi. You will need the Top Mount Valve for Sand 2" - SP071621 for the S310 filter body.
Reply
I notice there is no inlet/outlet connections which seem to come with the valves. Does your Hayward Multiport head SP0715ALL Vari Flo come with these connections?
Reply
Hi, This Hayward SP0715ALL Valve does not have pre-plumbed connections to the filter tank. You will have to make that connection.
Reply
need to replace entire valve system sp-715a-50, which one would I order
Reply
Hi, Lisa. You can use this SP0715ALL or the SP0715XR50 model valve.
Reply
Hi Plumber will install a new Hayward Valve. Our present one is SP-715-DE. Will this one fit our current DE. Plumber did say that all the valves are 2 inch. Once I order this one how long does it take to be received?\
Reply
Hi, Sandra. Yes, this valve will replace your SP-715-DE. All the ports are 2" FPT. Once it ships it will take 3-5 business day for delivery.
Reply
I need to replace the valve housing with a 5 pipe 2" system. The housing on mine says SP715-A-3.
Will this part be a good replacement?
Reply
Hi, BRF. Yes, this SP0715ALL Valve will be a good replacement.
Reply
I have an old 715Xr50 is the sp0715all the correct replacement?
Reply
Hello, This would be the correct valve you would need to get.http://www.inyopools.com/Products/02201253001092.htm?Keywords=SP0715XR50
Reply
I bought your spo715all valve to replace an old 715xr50. It does not come with the two filter unions required to connect it to the filter. there is a short 2" union and a 9 or 10" 90 degree union required. There is also a 1/2" hole that requires a plug, also not included. I cannot find these parts in your catalog and my local pool places have not been able to help either. can you provide me with the information to find these parts?
Reply
Hi, Ken. Unfortunately, that part is not available as a replacement part. I would recommend that you return this valve and purchase the Vari-Flo Valve 2" for DE - SP0715XR50.
Reply
Do they have left hand and right hand models , the one I have looks different . Two ports on left side waste on right . Sight glass on right as well ?
Hello, They do not have left and right-sided models. What is the model number of your filter? Also, what is your plumbing size?
Reply
The multi-port isnt adjustable from left or right hand. Every multi-port will have different entry and discharge ports.
Reply
No it is only made one way.
Reply
they do not have a left and right model
Reply
What can make and model can I replace this valve with?
I have a damaged Pac-Fab SP715 Sand.
Do you have anything?
Hi Louis, you can replace just the upper handle assembly or the entire valve if you need. Those options will be listed in this parts diagram.
Reply
I need to replace the multiport valve and spider gasket. On my current one, the sticker is very faded so I can't see the brand/part number. I found this number pictured below on the valve housing. Is this the correct replacement part?
Hi Travis, the top valve assembly and spider gasket are listed on this parts diagram for the TM-22 and SM-20 multiport valve series on key number 1 and the spider gasket is part number 4600-1148. Here is a general guide for How to Replace a Spider Gasket on a Multiport Valve that may also assist.
Reply
I need a key assembly for a Hayward multi port valve model number SP-715-A-5. Will this work? Is it returnable if not?
Hi, Instead of the product on this page we would suggest this Replacement Key Assembly for Hayward SP715 Valves we also suggest this SP715 Cover O-Ring and this SP715 Spider Gasket. You will also require this Spider Gasket Adhesive for installing the spider gasket.
Reply
I already tried this part, it seemed like it was going to fit fine, but as I tightened the screws, it lost tension. Is there another option or something I did wrong?
Reply
Hi Teri, This should be the correct part. Could you double-check the exact part # you ordered? We did put together this Video on How to Replace a Hayward Upper Valve Assembly which you should find helpful.
Reply
Is the valve complete with all the o-rings, spider gasket, etc... Will I only need to attach the existing plumbing to this valve?
Reply
Thank you for Contacting Inyo Pools, Yes this Multiport valve comes with all the O-rings. Like you said you will have to re-plumb the new one
Reply
Will this valve replace a SP0715G11 top mount on a S310 Pro Series sand filter?
Hi Thomas, this will not work for your S310 filter. You would need this Generic Top Mount Valve for Hayward Sand 2" (SP071621) for 2" plumbing or this Top Mount Valve for Sand 1.5" - PL0714 if you have 1-1/2" plumbing.
Reply
Why is it hard to turn valve
Reply
Hello, most often the reason these multiport valves begin to be difficult to rotate is due to the spider gasket within them failing. We recommend removing the valve top assembly to inspect the spider gasket within it. Here is a guide that we put together called "How to Replace a Spider Gasket on a Multiport Valve" that gives a better visual as to how these types of valves come apart.
Reply
I need to replace my cracked Hayward SP 715 A 50W. Is the Xp715ALL the direct replacement? Thanks!
This is the correct valve if your current valve wasn't pre-plumbed. This valve would require plumbing to and from the filter.
Reply