I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
Do you have a selector side valve to fit an old Heldor PF-50? Mfg. by Pac Fab. The filter works well as does our pump, but the selector valve needs replacing. Thank you.
Reply
Hi Ann, This valve here does work on the older Heldor PF-50 filter.
Reply
I have a purex triton 2 TR-60 with a sm 10-3 sand multi port valve wpuld your sm1-pp3 be the correct replacement ??
Reply
Hi Paul, The Pentair 261173 Valve would be the replacement for the SM10-3 used on a Purex Triton 2 TR-60
Reply
I have a SM10 valve and I need to replace the whole housing. Which one do I need? Mine is cracked pretty bad. Thank you.
Reply
Hi Nika, Could you let us know which filter your valve is going on? There should be a label on your filter tank that will give you these details.
Reply
Can you drain the pool with the pump? Would you use on the waste setting on the valve to bypass the filter and drain the pool?
Reply
Yes you can lower the water through the filter is you have a D.E. or Sand filter by sending the water directly to waste. Please note that if you are dropping the water level below the skimmer, I would recommend closing the valve to the skimmer and/or using a plug to cap off the skimmer.
Reply
This is listed under DE filters, but it says "Sand" on the picture. Will this work for a DE filter? Thanks.
Reply
Hello Mark, depending on what DE filter you have is depending on whether this valve would work for your needs. This particular valve works with a Pentair Quad D.E. Filter Parts. That is the only DE filter that this valve works with.
Reply
I have a Pac.fab sand filter (TR60) and a Praher SM-10. I need to replace the SM-10 due to cracking and leaking water. The center to center on the filter is 7.5 inches. What valve do I need as a total valve replacement?
Reply
Hi, Phil. The Pentair- SM1-PP3 can be used with the TR60 Sand filter.
Reply
does this replace brown colored valve sm-10 smi-hp3 for hayward sand filter. my nut going into the filter has cracked, it appears I have to replace entire valve. Suggestions? this is for 11/2 " hayward sand filter 50 psi 60 gpm
Reply
I have a PAC-FAB sand filter, model TR60, area is 3.1 sq.ft, flowrate is 60gpm. It has a 2" side-mount PAC-FAB valve identified as SP 710 (if that means anything). I need to replace the valve. What part # do I need?
Reply
Hi, Rob. You can use any of the 2" MPV listed on the Pentair Triton 2 Fiberglass Sand Filter part page. The SP710 valve is a 1-1/2" valve and the SP0715ALL is the 2" valve.
Reply
I have a Pac-Fab super flow PF-50 sand filter. I want to have a multiport valve installed on it so I can vacum to waste. Currently I have a slide valve that I use to backflush. Will this valve kit work with my sand filter?
Reply
Yes, this valve will work on your model filter as long as you have 1.5-inch plumbing.
Reply
hI- I have a Pentair FNS-Plus (FNSP36) and the handle to divert the water no longer works correctly so I am assuming- after all the Q&A's I've read -I need a valve kit. I am looking for a SM10-2d.e. (showing 6 bolts) would this Pentair Multiport Valve Kit 1 1/2" Generic Threaded (SM1-PP3) work? If so - what exactly would I have to order?
Thanks in advance for your response.
Reply
Hi, Kathy. You can either replace the entire valve with this SM1-PP3 valve or rebuild it using the Top Valve Assy - E-50-S1, Diverter Gasket - 271104 and the Cover O-ring - 271103.
Reply
I own a pool cleaning business and have never encountered this problem before. I backwashed and rinsed this style multi port valve and it seemed normal. I then tried to put it on recirculate and the water was still coming out of the waste end. Which is weird. Then I put it back on filter mode and it seemed like it never backwashed properly, barely any flow in the pool. Is there any reason why these things happened or is the multi port broken?
Reply
I HAVE THE SM1 PP3 valve and when in filter mode , water is dripping out of the back wash drain pipe... is there a gasket I should replace in it to prevent the draining while in filter mode?
Reply
This multiport seems to match up to our TR60. It's an SM-10 3 Sand, but it is a 75 GPM and this one displayed is a 60 GPM. Will it work?
Reply
Based on the information would recommend the 261055
Reply
This valve IS used on that model filter. The GPM rating is just a max rating. The GPM or flow rate is dependant on the size of your pump as well. You should be fine with this replacement valve.
Reply
I recently ordered and received part #sm1-pp3 for a pentair quad 60 de filter. It says on the box that this product is for a sand filter. Will this be compatible with the pentair quad de filter?
Reply
Hi, Terrence. Yes, this SM1-PP3 valve is compatible with the Pentair Quad D.E. Filter.
Reply
I have a pac fab pentair tr-100
Sand filter I need to replace the multi port valve which one is compatible?
Reply
My Pentair 1 1/2” multiport valve handle bolt failed. Looking to purchase a new valve kit. I have a Triton II TR-60 with 1 1/2” plumbing. Is your Praher Part # 4611-0 the direct replacement? See photo below.
Hi Linda, Thanks for the photo yes this would be the direct replacement valve for SM-10-3 valve shown in your photo. We have this valve in stock ready to ship!
Reply
It looks like this valve will fit my pentair/pac-fab tr60 sand filter. My old directional valve has 1/1/2" piping. Am I correct!!!
Reply
Hi Stuart, yes this model multiport valve is compatible with the Pentair Triton II TR60 model sand filter.
Reply
does this replace one on TR140??
Reply
Hello Johnny, yes this is a compatible multiport valve for your Pentair model TR140 sand filter. I have also emailed you an estimate that you can convert to an order if you would like. Item is currently in stock and ready to ship.
Reply