SLR9 pump matches up with an avalanche 60 filter?
Reply
If you have a Jacuzzi Avalanche AV60 filter you can use the SLR9 1.5 HP Pump Horizontal Discharge (94022435).
Reply
Will this pump work with a Jacuzzi Sherlock 80 filter system?
Model # SHER80-S1LR9-3-HK6
Order # 94223914
Reply
This pump would be too strong for that model filter. You would need to either use a 3/4 hp model or a Sherlock 160 model to make sure flow rates are compatible.
Reply
Do you sell a dual speed version of this pump?
Reply
We do have access to the Dual Speed Jacuzzi SLR 1.5 HP Pump but it would be a special order taking 3 weeks for delivery.
Reply
Would this pump be a replacement for sta-rite ABGS4F 2A4
Reply
Hi Sue I would suggest the 94027794 SLR Vertical Discharge Pump as your ABGS4F 2A4 pump is vertical discharge and not horizontal discharge.
Reply
Hello,
I have a Sherlok Element Filter system manufactured by Jacuzzi, with an LR Series Pump/Strainer.. I am looking to replace the Strainer and pump assembly with the S15TLR-6-S1 2 speed, 115 volts, Amps 12.0/3.1. The pump assembly outlet must have a horizontal outlet to connect to the filter housing. I am not sure how to or who I can purchase this product through? I am having a hard time locating one online.
Karen Cate
96 Clough Hill Rd
Lyman, NH 03585
603-616-2538
Reply
Hi Karen, The reason you're having trouble finding that pump is because there is not one available. You will have to purchase this pump and convert it into a 2-speed pump by switching out the motor.
Reply
Will this work as a replacement for a century lasar sofpool pump?
Reply
Hi Tee, I can't confirm that it will be an exact replacement base off of the info provided. However, if you can provide us with more info like the make and model of your filter and photos of your current pump we can confirm.
Reply
Will a 1 hp pump work on a 28' round above ground pool with a Hayward heater installed between the pump and pool or should I use a 1.5 hp pump.
Reply
A 1HP jump would work just fine with your size pool.
Reply
I have a 10000 gal swimming pool. What size pump or HP do I need for that water capacity?
Reply
Hi Ella, The 1 hp pump is adequate for a 10,000 gallon pool. If you can provide the filter model and or size we confirm if this pump will be sufficient.
Reply
What is the advantage to verticle as opposed to horisontal discharge?
Reply
Hello Greig, sometimes horizontal vs vertical is all about how much space you have or where your plumbing is located, certain people just prefer vertical.
Reply
i have waterway part 3410612-2041 l.5 hp circulator pump with horizontal connection to filter. this appears to be identical, am i correct? thanks.
Reply
Hi, This pump can be used to replace the Waterway Pump 3410612-2041. However, the connection from the pump to the filter is not compatible with this pump.
Reply
can i replace my ao smith 1.5 spl pump with this one? part# 7-177894-24
Reply
Hi, The correct replacement would be the Jacuzzi SLR9 1HP Pump (94022430). The 1.5 HP model will circulate more water than you may need or that your filter can handle.
Reply
Hi! I have a large pool, 33' round pool. 30,000 plus gallons. I need a 2 spd, 1.5 hp, 115 volt horizontal discharge. However, I really only need the electric motor. I can replace myself, but I need to make sure the mounting flange (from motor to pump) is the same. Can you lend any advice? My pump is model number is S15TLR. Thanks!
Reply
Hi, Dave. You can replace the motor yourself if you're mechanically inclined. You can use the Century BN50 Motor to replace your existing pump motor.
Reply
Hello,
I just purchased a SLR9 1.5 HP Above Ground Pump Horizontal Discharge (94022435) from you. Do you know the parts that I need to purchase in order to connect it the two hoses? The old pump has a connecting piece between the filter pump and hose with an on/off valve. It looks like its attached pretty good. I'd like to purchase a new one. Also, the other opening on the filter pump appears to have a connector between the opening on the filter and where the hose attaches. Thank you!
Reply
Hi, Katie. You can use the Hose Adapter - 417-6060 for the suction side port and the Interconnect Assembly - 42363408R000 for the discharge port.
Reply
Would this pump be a good replacement for my Sta-Rite System 2 PLM 150?
Do you have a pump curve for this pump?
Reply
The SLR9 1.5 HP Above Ground Pump Horizontal Discharge - 94022435 is designed for Above Ground Pool applications that do not require the pump to self-prime. This pump is a gravity fed pump, not suction. If you are installing on above ground pool application, yes, it may be installed with your PLMSeries Cartridge Filter 150 Sq. Ft. - PLM150.
Reply
Hi I have a Jacuzzi 1.0 spl 2 speed serial bz09 17. part no. 7 186554 01. it has a side discharge looking for a compatable replacement hope you can help me out thanks
Reply
Hi Bob, I would suggest the 1 HP Jacuzzi SLR Horizontal Discharge Pump, however, this pump will be a single speed and not dual speed. We do not carry the dual speed SLR complete pump. You could just replace your motor with a 1 HP Dual Speed Replacement Motor and then use your current pump housing. If you go this route you will also need a Jacuzzi SLR Shaft Seal Kit
Reply
I have a Sherlock to Cousy 80 cartridge filter and I'm leaking between the pump and the motor and I'd like to replace it it's very old looking at your photo with the pump on the left hand side of the motor on the right I need the 90 degree to pop out the back side of it will this connect right to that if I order the one horsepower part number 94022 430
Reply
Hi, Paul. A 1.5 HP pump may be too large to use with a Sherlock 80 filter. I would recommend staying with the 1 hp model unless you'll be increasing the filter size also.
Reply
I have a above ground Avalanche AV60 filter with a Magnetek 1.5 SPL motor. The part number is 7-177760-23,type SP, volts 115,amps. 12.4, rpm 3450, FR R48Y, Form PHS, insul class B, PH 1,CODE K,ENCL DP, SERIAL bu5-16. Need to replace motor. The one that was recommend was the 1 hp.Why is there a different in hp? Do I need to change the impeller because of the difference? What's
the best motor do I need, the 1hp or the 1.5hp?
Reply
How does the side discharge mount to my filter I don't see any threads. Mine has 6" plastic tube that turns on to my pump..
Thanks
Reply
Hi, Rich. You will need the following parts, Interconnect Pipe - 42-3632-00-R, Nut - 14-4273-06-R, Nut O-ring - 47-0228-68-R, Interconnect O-ring - 47-0328-00-R to connect this pump to your filter.
Reply
I need to connect the mother to the filter and I want to know which connection is the right one because my old motor has the that pipe flat but this motor is different and the connection doesn’t fix correctly, can you tell me which is the right connector?
Reply
Hi, Roxana. I will need to know the model or send pictures of the filter you have in order to assisty
Reply
A few weeks ago I posed a question on your website about a replacement pump and you provided the correct pump to purchase as a replacement. The following information was provided :SLR9 1.5 HP Above Ground Pump Horizontal Discharge - 94022435
I just signed on to purchase this pump however your website says "no longer available". Not sure what to do. Can you provide further advice please?
Thanks
Reply
We also carry the pureline above ground pool pump model PL1502 that you can use. The connections are different and may just require standard plumbing and or fittings to above ground pool hose to work. You can also view other above ground pool pumps by clicking here.
Reply
